PrintPDF Spec Sheet SMD Power Inductors for Automotive (Grade1)/ Industrial Applications (ES series) EST1060T4R7NDGA Features Item Summary 4.7uH30%, 5.5A, 10.1x10.0x6.0mm Lifecycle Stage Mass Production AEC-Q200 qualified Standard packaging quantity (minimum) Taping 2000pcs(500pcs*4reel) Products characteristics table External Dimensions Dimension L 10.1 0.3 mm Inductance 4.7 uH 30 % Dimension W 10.0 0.3 mm Case Size (mm) 10.1x10.0 Dimension H 6.0 0.3 mm Rated Current (max) 5.5 A Dimension a 3.5 0.15 mm Saturation Current (max) 5.8 A Dimension b 2.65 0.2 mm Saturation Current (typ) 8 A Temperature Rise Current (max) 5.5 A Temperature Rise Current (typ) 6.8 A Recommended Land Patterns DC Resistance (max) 14 m DC Resistance (typ) 11 m LQ Measuring Frequency 100 kHz Self Resonant Frequency (min) 32 MHz *ref. (Reference Value) *ref. : reference value Operating Temp. Range -55 to +150 (Including-self-generated heat) Temperature characteristic 20 % (Inductance change) RoHS2 Compliance (10 subst.) Yes REACH Compliance (173 subst.) Yes Soldering Reflow 2018.01.12 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the data at any time without notice. Before making final selection, please check product specification. Halogen free / RoHS compliant 2017/12/14 Wire Wound Inductor -Electrical Characteristics Data- SMD Power Inductors for Automotive(Grade1)/ Industrial Applications (ES series) unit : inch Dimension unit : mm ( 0.398 + / - 0.012 ) Length : 10.1 + / - 0.3 EST1060T4R7NDGA ( 0.394 + / - 0.012 ) Width : 10.0 + / - 0.3 ( 0.236 + / - 0.012 ) Height : 6.0 + / - 0.3 Inductance : 4.7 uH ( test freq at 0.1MHz ) DC Resistance : 0.011 / 0.014 ohm ( typ / max ) A ( typ / max ) Saturation Current : 8.00 / 5.80 A ( typ / max ) Temp. rise Current : 6.80 / 5.50 Saturation current typical : 30% reduction from initial L value. Temp rise Current typical : Temperature will rise by 40 deg C AEC-Q200 qualified DC Bias vs Inductance DC Bias vs Temperature 60 10 50 8 40 6 30 4 20 2 10 0 0 0 2000 4000 6000 8000 10000 0 4000 8000 12000 16000 20000 DC Bias mA DC Bias mA Frequency vs Inductance 100 10 1 0.1 0.1 1 10 100 1000 Frequency MHz The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the data at any time without notice. Before making final selection, please check product specification. The products are tested based on the test conditions and methods defined in AEC-Q200. Please consult with TAIYO YUDEN for the details of the product specification and AEC-Q200 test results, etc., and please review and approve TAIYO YUDEN s product specification before ordering. Inductance uH Inductance uH Self-temperature rise deg