RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 16,66 0,656 PCB EDGE LP 15,88 0,625 L.E.D. 1 L.E.D. 2 8 1 11,43 0,13 0,450 0,005 10,89 0,429 XXXXXX date code XXXX RC Datumscode LED 1 RIGHT LED 2 LEFT LED NO. LED 1 RECHTS CODE IDENT. NR. LED 2 LINKS 203348 YELLOW GREEN L1 GREEN YELLOW L2 203349 203350 GREEN GREEN L3 203351 GREEN RED L4 MATERIALS AND FINISH 203352 ORANGE/GREEN ORANGE/GREEN L9 HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK Information: Tolerances Scale 2:1 SHIELDING: Cu ALLOY, PLATED WITH Ni SCHEMATIC NUMBER M5B01 All Dimensions CONTACTS: PHOSPHOR BRONZE in mm Designation CONTACT FINISH: Au, 0.8 m (30 in), OVER Ni All rights reserved. Subject to modification without TERMINAL FINISH: Sn MATTE MOD JACK -MJIMR Only for Information. prior notice. A To insure that this is the latest Drawing will not be updated. LED LENS: EPOXY version of this drawing, please 8C10T, 1x1, INT. MAG., LED. REVERSE LATCH contact one of the ERNI companies MECHANICAL CHARACTERISTICS before using. I (1/2) DURABILITY: 1000 MATING CYCLES www.ERNI.com 203347 A 09.06.2008 A3 OPERATING TEMPERATURE: 0C TO 70C Index Date Class MJIM Consider protection memo from DIN 34 25,40 1,000 MAX 3,05 0,50 0,120 0,020 0,38 0,10 0,015 0,004 14,72 0,580 13,63 0,537 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTCKUNGSSEITE) TOL 0.05 .002 UNLESS NOTED 1,27 0,050 0,89 0,07 0,035 0,003 x 10 0,64 0,025 2,54 0,100 1,60 0,07 0,063 0,003 x 2 2 10 3,25 0,07 0,128 0,003 x 2 1 9 1,02 0,07 0,040 0,003 x 4 11 13 12 14 11,43 0,450 13,57 0,534 15,49 0,610 ELECTRICAL SCHEMATICS 1000 BASE T - M5B01 ELEKTRISCHER SCHALTPLAN PCB CABLE A 4X 0.01 F 4X 75 Ohms TD0+ P1 J1 MX0+ J2 MX0- TD0- P2 J3 MX1+ TD1+ P3 J6 MX1- TD1- P6 J4 MX2+ TD2+ P4 J5 MX2- TD2- P5 J7 MX3+ TD3+ P7 J8 MX3- TD3- P8 1000pF/2KV VCC P9 GND P10 LED SPECIFICATIONS LED ANWEISUNG V VI CIRCUIT DIAGRAM COLOR f f f SCHALTPLAN FARBE MAX mA TYP 11 13 YELLOW 2.1 2.5 20 12 14 MAGNETICS SPECIFICATIONS 25C 11 13 GREEN 2.2 2.5 20 12 14 TURNS RATIO: 1CT:1CT 3% OCL(100 KHz, 0.1 V, 8 mA) 350 H MIN 11 13 RED 2.25 2.5 20 12 14 INSERTION LOSS: 11 13 1-100 MHz -1.1 dB MAX 12 14 RETURN LOSS: ORANGE/GREEN 2.05/2.2 2.5 20 1-40 MHz -18 dB MIN NG NG 60 MHz -14 dB MIN Information: Tolerances Scale 2:1 80 MHz -12 dB MIN 100 MHz -10 dB MIN All Dimensions in mm CROSSTALK: Designation 1-100 MHz -35 dB TYP All rights reserved. Subject to modification without CMR: MOD JACK -MJIMR Only for Information. prior notice. To insure that this is the latest Drawing will not be updated. 0.1 - 30 MHz -50 dB TYP version of this drawing, please 8C10T, 1x1, INT. MAG., LED. REVERSE LATCH 30 - 60 MHz -40 dB TYP contact one of the ERNI companies before using. 60 - 100 MHz -35 dB TYP I (2/2) www.ERNI.com 203347 ISOLATION 1500 Vrms A3 Class MJIM Consider protection memo from DIN 34 2,03 0,080 4,57 0,180 3,05 0,120 2,54 0,100 8,89 0,350