High Value / High Voltage Resistors
Type HB Series
Key Features
Up to 15kV Element
Voltage
Unique specification
for the most deman-
ding applications
High Ratio of Size
to Power
The solution to your
PCB population
problems
1kW to 1GW
Coupled with 1%
tolerance gives
ultimate design
flexibility
Established Product
with Proven Reliability
Low Inductance
For the fastest
TEConnectivity (TE) is a leading supplier of standard and custom designed high
switching speeds
value/high voltage resistors for high voltage, industrial, control, medical and
general-purpose use. The HB is a tough epoxy coated high voltage resistor, with axial or
radial leads, values up to 1G Ohm and an operational voltage to 20kV as standard and
Applications
30kV to order. The resistors are made from quality materials for optimum reliability and
High Voltage
stability. TE can test resistors to conform to relevant international, MIL or customer
Voltage Divider
specifications. TEis happy to advise on the use of resistors for high frequency
Surge
applications and to supply information for high voltage use.
Filter
Characteristics - Electrical
Balancing
HBA HB1 HB3
Inrush Limiting
Power Dissipation - Power @ 20C (W): 0.8 2.0 4.0
@ 70C: 0.4 1.0 2.0
Ohmic Value - Min (Ohms): 1K 10K 10K
Max: 120M 1G 1G
Resistance Tolerance (%) (Tighter By Request): 1%, 2%, 5% 1%, 2%, 5% 1%, 2%, 5%
Maximum Working Voltage - DC or ACrms (Volts): 1kV 7.5kV 15kV
6 6 6
Insulation Resistance - Epoxy Coated, @500V dc (Ohms): >10 M >10 M >10 M
Load Stability - 1000hrs @ 70C (%): 0.5% 0.5% 0.5%
Temp. Rapid Change - -55C to 125C for 5 cycles (R): 0.1% 0.1% 0.1%
Endurance - 1000 Hours @ 200C (R): <=2% <=2% <=2%
Resistance to Soldering Heat - 350C for 3.5seconds (R): 0.05% 0.05% 0.05%
Temperature Coefficient (ppm/C): 100ppm/C 100ppm/C 100ppm/C
(20ppm/C available to special order)
Voltage Coefficient: Negligible up to 100K Negligible up to 200K
Increasing to
Increasing to 0.02ppm/Volt at 800K
0.01ppm/Volt at 1M0
Increasing to
Increasing to 1.0ppm/Volt at 5M0
1.0ppm/Volt at 10M
Increasing to
Increasing to 2.0ppm/Volt at 50M
2.0ppm/Volt at 100M
Increasing to
Increasing to 8.0ppm/Volt at 1000M
8.0ppm/Volt at 1000M
Ambient Temperature Range (C): -55 to 125 -55 to 125 -55 to 125
Long Term Damp Heat (%): 0.25% 0.25% 0.25%
(Steady state 56 Days 95% RH at 40C)
Noise (Quantech) Dependent -20dB (0.1 V/V) at lower values
on Resistor Type and Value: +10dB (3.3 V/V) at higher values
Encapsulation: Epoxy coating (Optional)
Solvent Resistance: Print will withstand the action of all
commonly used industrial solvents.
Lead Material: Tinned copper wire
Lead Length: Minimum 20mm
Lead Diameter: Nominal 0.6 0.05mm
1773310 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.High Value / High Voltage Resistors
Type HB Series
Dimensions -
Type HBA, HB1 & HB3 (Radial) Type HB1 & HB3 (Axial)
C
B
F
A
D
G
H
E
Type A B C D E F G H I
Uncoated 10.2 7 1.75 60.2 5.0
HBA
Epoxy Coated 12.5 8 2.6 60.5 5.0
Uncoated 8.4 26 1.5 33.8 22.9 26 66 1.5 8.4
HB1
Epoxy Coated 10.4 26.5 3.0 35.8 22.9 26.3 66 3 9.2
Uncoated 8.4 51.1 1.5 33.8 48.3 51.1 91.1 1.5 8.4
HB3
Epoxy Coated 10.4 52 3.0 35.8 48.3 53.5 91.1 3 9.6
Derating Curve Surface Temperature Rise
100
4.5
HB3
90
4
HBA HB1 HB3
80
3.5
70
3
60
2.5
50
HB1
2
40
1.5
30
HBA
1
20
0.5 10
0 0
0 0.5 1 1.5 2 2.5 3 3.5 4
0 20 40 60 80 100 120 140
Power Dissipation (Watts)
Ambient Temperature (degC)
How to Order
HB 3 1K0 J Z R E
Common Part Power Rating Resistance Value Tolerance Temp. Coefficient Lead Style Coating Styles
@ 70C of Resistance
1Kohm
(1000) R - Radial Leads
F - 1%
HB- High Value /
A - 0.4W
1K0
E - Epoxy
A - Axial Leads
High Voltage G - 2%
Blue Coating
1 - 1.0W Z - 100ppm
1Mohm (HB1, HB3 only for
Resistor
J - 5%
(1000000) Axial Leads)
3 - 2.0W
1M0
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-
ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
Power (W)
Surface Temp. Rise (C)