402321202

Ultra-Fast Fully Insulated FASTON Receptacles and Tabs FASTON Terminals (Insulated and Uninsulated) Ultra-Fast Fully Insulated FASTON Receptacles and Tabs Product Facts One-piece Fully Insulated Premier Line FASTON Receptacle crimp helps prevent shock and short hazards Designed for correct lead-in of tab Designed for full mating with a variety of tab styles including those with shoulders Funnel wire entry Wire Stop Visual inspection of crimp and wire brush Assemblies are color-coded by wire size Assemblies contain wire size and tab size designation Mating tab thickness marked on terminal and visible through housing The Ultra-Fast Fully Insulated and Tab are preinsulated This permits positive (.110, .187 and .205 Series) FASTON Receptacle and assemblies featuring a engagement, even in blind Tab offers the advantage of housing molded from mating locations. Application tooling a completely protected type 6/6 nylon material available to meet The Ultra-Fast FASTON terminal and a wire crimp with a +130C UL production requirements Tab housing completely with comparable temperature rating. encloses a tin plated copper Tin plated copper alloy electromechanical The Ultra-Fast FASTON alloy FASTON tab. The terminals performance to open barrel Receptacle housing FASTON tab is recessed UL rated at + 105C F crimp FASTON Terminals. completely encloses a tin sufficiently within the The User-Friendly design Terminates 26-10 AWG plated copper alloy Premier housing to allow its use in combines easy mating with solid, fused and stranded FASTON receptacle which 600-volt applications. The rounded corners. The .187 wire (Flags terminate has been stress-relieved for housing is designed to and .250 series receptacles stranded wire only) increased durability and completely encapsulate the incorporate a two-stage roll resistance to abuse. The tab and receptacle when the configuration and a canti- FASTON receptacle is two are mated. Performance Capabilities lever mounted dimple which recessed sufficiently within Quality control is easily Meets UL-310 specification provides easy insertion and the housing to allow its use maintained. The nylon for quick connect terminals multiple independent points in 600-volt applications. The housing is translucent, UL listed under of contact for reduced tab receptacle portion of the allowing visual inspection of File No. E-66717 R interface resistance. terminal is designed for the termination. In addition, Meets CSA C22.2, No. 153 Ultra-Fast Fully Insulated positive mating with a variety a crimp code on the platform specification for quick FASTON Receptacles, of tabs, including those with hand tool is indented into the connect terminals Flag Receptacles and Tabs shoulders. The housing has housing during the crimping R CSA Certified under preclude the need for costly a slotted membrane which operation which identifies File No. LR 7189 electrical safety interlocks or is displaced by two tab that the proper crimp dies special protective shields to shoulders allowing proper 600-volt application were used. help prevent shock hazards. engagement of tab and capability (1,000 volts for Depending on production In addition, electrical short receptacle while maintaining signs and fixtures) requirements, TE provides circuits from exposed leads the fully insulated a complete selection of are eliminated, even in characteristic. terminating equipment from equipment requiring close Positive entry and lead-in of hand tools to automatic contact spacing. the tab is provided by the lead makers. The Ultra-Fast FASTON inner housing wall and the Receptacle, Flag Receptacle lead-in on the terminal rolls. 89 Catalog 82004 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015FASTON Terminals (Insulated and Uninsulated) Ultra-Fast Fully Insulated FASTON Receptacles and Tabs (Continued) To test a product, it must be subjected to 500 on and off Test Specifications cycles at twice the rated current for the particular wire size. The following information and accompanying graphs are The temperature rise is measured on the 24th cycle and taken from TE Product Qualification Testing of Ultra-Fast the 500th cycle. The maximum temperature rise is limited FASTON product. Tests were conducted on representative to 85C above ambient temperature with a maximum of production samples, and all values shown are averages of 15C increase on any sample between the 24th and 500th group results. The values shown are typical results and cycles. Our testing of 16 AWG wire application indicated a may vary due to differences in processing, application and 25.5C maximum temperature rise up to 500 cycles, with a methods of testing. maximum increase of 0.8C from the 24th to the 500th cycle for one sample in the test group. Current vs. Temperature Rise (16 AWG) Engagement/Separation The heat generated by the current passing through a termination is a primary limit to the load-carrying The forces caused by the rolls of FASTON style terminals capabilities of the application. A low termination resistance determine the contact interface integrity of a mated will produce a lower temperature rise as current is applied. receptacle and tab. These forces must be high enough to In order to evaluate this characteristic, UL has established prevent oxidation and corrosion from forming inside the current ratings for each wire size and set a maximum contact area. As these forces are raised to increase the temperature rise to assure safe operation. For example, 16 electrical performance, the engagement and separation AWG stranded wire has a UL 310 maximum temperature forces for mating the contacts are significantly increased. rise of 30C above ambient temperature at the rated current For this reason, the Premier Low Insertion Force FASTON of 10 amps. In the testing of the Ultra-Fast FASTON product concept of receptacle design has been carried over to the applied to 16 AWG wire, the temperature rise was found to Ultra-Fast FASTON products. This feature provides be below 10C at the rated current. In fact, the temperature consistent engagement and separation forces while rise did not exceed 30C until the current was above 20 maintaining a high standard of electrical reliability. amps, more than twice the rated current. Crimp Tensile Current Cycling vs. Temperature Rise (16 AWG) 1 UL does not have requirements for wire gauges below 22 AWG. Maintaining a safe temperature rise during cyclic Note: Minimum requirements are per TE specifications. applications of excessive current is the toughest challenge for the crimp-thru-plastic concept. The ability of the The crimp tensile strength of a wire-to-terminal connection Ultra-Fast FASTON product line to meet this goal sets it is important in guarding against such hazards as wire apart from other preinsulated terminations. TEs experience flexing, vibration and wire strain. However, maximum tensile in crimp development results in a termination that exhibits strength does not insure maximum electrical performance. stable heating characteristics which are well within the An acceptable compromise between tensile strength and safety requirements of the industry. electrical performance must always be reached, using recommended crimp heights. 90 Catalog 82004 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ultra-Fast Fully Insulated FASTON Receptacles and Tabs