55PC0114 SPECIFICATION CONTROL DRAWING Date Revision WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED, TITLE 09-18-03 D SILVER-COATED HIGH STRENGTH COPPER ALLOY, GENERAL PURPOSE, HOOKUP, 600 VOLT This specification sheet forms a part of the latest issue of Raychem Specification 55PC. CONDUCTOR - SILVER-COATED HIGH STRENGTH JACKET - RADIATION-CROSSLINKED, COPPER ALLOY MODIFIED ETFE CONSTRUCTION DETAILS FINISHED WIRE CONDUCTOR DIAMETER WEIGHT DIAMETER (in.) MAXIMUM WIRE CONDUCTOR (in.) ( lbs/1000 ft.) PART NUMBER RESISTANCE SIZE STRANDING LOWER UPPER UPPER UPPER LOWER TARGET 1/ TARGET AT 20C TARGET (AWG) (number x AWG) SPEC SPEC SPEC SPEC VALUE SPEC (ohms/1000 ft.) VALUE VALUE LIMIT LIMIT LIMIT LIMIT LIMIT 55PC0114-30-* 30 7 x 38 .0110 .0115 .0120 1170221 .0235 .0249 .60 .64 .0279 55PC0114-28-* 28 7 x 36 .0140 .0145 .0150 74.4 .0251 .0265 .84 .89 55PC0114-26-* 26 19 x 38 .0183 .0191 44.8 .0291 .0305 .0319 1.23 1.34 .0175 55PC0114-24-* 24 19 x 36 .0225 .0233 .0241 28.4 .0341 .0355 .0369 1.81 1.93 22 19 x 34 .0293 17.5 .0429 2.69 2.83 55PC0114-22-* .0285 .0301 .0401 .0415 55PC0114-20-* 20 19 x 32 .0365 .0375 .0385 10.7 .0481 .0495 .0509 4.11 4.27 .0607 55PC0114-18-* 18 19 x 30 .0452 .0464 .0476 6.8 .0573 .0590 6.27 6.56 55PC0114-16-* 16 19 x 29 .0527 5.3 .0684 8.01 8.33 .0514 .0538 .0646 .0665 WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 200C INSULATION FLAWS: Maximum continuous conductor temperature Spark Test, 3.0 kV (rms) VOLTAGE RATING: 600 volts (rms) at sea level Impulse Dielectric Test, 8.0 kV (peak) COLOR: White preferred INSULATION THICKNESS: .006 in. (nominal) CROSSLINKING PROOF TEST: 300 3C for 1 hour SHRINKAGE: 230 3C for 1 hour, 0.125 in. (maximum) in 12 in. IDENTIFICATION AND COLOR STRIPING DURABILITY: VOLTAGE WITHSTAND TEST (Post Environmental): 125 cycles (250 strokes) (minimum), 500 g weight 2500 volts (rms) INSULATION ELONGATION AND TENSILE STRENGTH: Elongation, 50% (minimum) PART NUMBER: Tensile Strength, 5000 lbf/in (minimum) The in the part numbers above shall be replaced by color code designators. 1/ Example:AWG 22, white: 55PC0114-22-9 AWG 22, white with black stripe: 55PC0114-22-90 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, R Wire & Cable TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. 501 Oakside Avenue Redwood City, CA 94063-3800 Page 1 of 1 DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL Phone: 1-800-227-8816 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. Fax: 1-650-361-6297 REFERENCE DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Multi-Conductor Cables category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : 8916-GRY-100 8917-BLK-100 8917-GRN/YEL-100 8918-GRN/YEL-100 8920-BRN-1000 8920-RED-1000 89907-LT-DEC/GRY-500 CR3909-000 CR3927-000 01342.35T.01 01364.35T.01 003201-000 CS2885-000 CS8782-000 CS9912-000 6200UE-NAT-U1000 CTC- 0062-20-9/5-9 CTC-0062-22-9/5-9 6304FE-877-U500 6309UE-877-1000 6320UE-NAT-U1000 644833-000 6502FE 8771000 6504UE-877- U1000 CW9530-000 CX6543-000 CXA-0066-20-4-9CS2973 CXA-0078-16-1-9CS2405 CXA-0078-22-4-9CS2405 CXA-0078-24-4- 9CS2405 CXA-0140-16-6/9-9CS2405 CY0660-000 706/2R-BLACK-EACH 720451-000 730859-000 MCC-USB-4-250 752687-000 768146-000 773159-000 7934A-BLK-1000 8125-CHR-100 8164-CHR-1000 820457-000 8205-CHR-1000 8240-BLK-U1000 82723-NAT- 1000 82907-NAT-500 83003-YEL-500 83005-WHT-500 83006-DK-GRN-100