G-NSDOG1-006

DOG1 MEMS SERIES VOLTAGE INCLINOMETER SPECIFICATIONS Single axis inclinometer Measurement range 180 Voltage output The DOG1 MEMS-Series inclinometer single axis is mainly developed with focus on platform leveling, FEATURES dynamic engine management, tip-over protection and tilt alarm. 8-30 VDC supply voltage Up to 90 degree tolerance on A fast response time and good accuracy makes this 2nd axis device the ideal choice for mobile leveling Digital signal processing includes applications. It features digital signal processing o filter (e.g. vibration including temperature compensation. damping) The integrated filter improves performance and allows o temperature using the sensor in many noisy environments (e.g. compensation vibrations). 12 bit resolution 100 Hz refresh rate The inclinometer includes a powerful digital signal -40 C to 85 C temperature processing that offers various filteralgorithms and range allows customer specific OEM solutions. It is possible Accuracy typically to adjust the sensor to different environments yielding o 0.5 - 40 C to 85 C an optimized performance. Customization can also be o 0.15 25 C made in terms of angular range and connectivity, i.e. cable and connector. APPLICATIONS Mobile and stationary cranes The PA6.6 housing is very compact in size and has Lift platforms compression limiter bushings for safe installation of Building control the sensor. It is compatible with oil, grease and fuel Weighing systems also. Therefore it is frequently used for engine and Truck chassis levelling vehicle applications. Vehicle applications Road construction machines SENSOR SOLUTIONS /// DOG1 MEMS SERIES VOLTAGE INCLINOMETER 07/2017 Page 1 DOG1 MEMS SERIES VOLTAGE INCLINOMETER Dimensions mm Vector of gravity (zero position) SENSOR SOLUTIONS /// DOG1 MEMS SERIES VOLTAGE INCLINOMETER 07/2017 Page 2