M85049/85-10W02

THIS DRAWING IS A CONTROLLED DOCUMENT. REVISIONS SELF-LOCKING SHIELD BAND TERMINATION SHRINK BOOT ACCOMMODATION ADAPTOR 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR, AND DESIGNED TO MEET REQUIREMENTS OF AS85049/85. 2. ALL COMPONENTS SHALL BE PACKAGED AND SUPPLIED IN A PLASTIC BAG AND LABELED WITH M85049/85 DESIGNATION. e.g. M85049/85-16W02. 3. THIS ADAPTOR MATES TO CONNECTOR MIL-DTL-38999 SERIES I & II. 4. PART SUPPLIED WITH STANDARD DETENTED SELF-LOCKING WHICH PROVIDES A POSITIVE AUDIBLE DETENTED COUPLING. 5. CATEGORY 3B - MEDIUM DUTY - NON-ENVIRONMENTAL 6. FOR MATERIALS AND PLATING FINISHES INFORMATION REFER TO R85049. FOR ALTERNATIVE MATERIALS AND PLATING FINISHES CONTACT TE CONNECTIVITY. DIMENSIONS: MATERIAL: SEE P/N BREAKDOWN FINISH: SEE P/N BREAKDOWN DWN:N.HAWKINS 05/06/2019 INCHES CHK: R.STYLES 14/06/2019 TE Connectivity TOLERANCES UNLESS OTHERWISE SPECIFIED: PART NUMBER: APVD: M.PAUL 27/06/2019 R85049/85 SERIES PRODUCT SPEC: GENERAL TOL NAME: LINEAR .01 Connector Accessories, Electrical, Backshell, ANGULAR 1 - Straight, Self-Locking, Shield Band Termination (RFI/EMI), Shrink Boot Accommodation, Category 3B APPLICATION SPEC: SIZE CAGE CODE DRAWING NO RESTRICTED TO - 06090 P29494 WEIGHT: A4 SCALE SHEET REV OF CUSTOMER DRAWING BA 1.5:1 1 2 1469-35 (3/13) RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. ALL RIGHTS RESERVED. COPYRIGHT 20 BY C 06090-M85049/85-16W02 YYWWTHIS DRAWING IS A CONTROLLED DOCUMENT. REVISIONS 1.540 (39,1) REF 1.350 MAX (34,3) .730 MAX (18,5) .406 (10,3) .344 (8,7) A DIAMOND KNURL .130 (3,3) .140 (3,5) MARKING LOCATION STRAIGHT KNURL TABLE 1 B DIA .010 C DIA CONNECTOR SHELL SIZE A ENTRY SIZE REF ACCESSORY THREAD MAX SHELL SIZE DIA SERIES I SERIES II 01 02 01 02 08 09 8 7/16-28 UNEF .859 (21,82) N/A .250 (6,35) N/A .395 (10,03) 10 11 10 9/16-24 UNEF .986 (25,04) N/A .312 (7,92) N/A .457 (11,61) 12 13 12 11/16-24 UNEF 1.156 (29,36) .312 (7,92) .438 (11,13) .457 (11,61) .583 (14,81) 14 15 14 13/16-20 UNEF 1.281 (32,54) .438 (11,13) .562 (14,27) .583 (14,81) .707 (17,96) 16 17 16 15/16-20 UNEF 1.406 (35,71) .500 (12,70) .625 (15,88) .645 (16,38) .770 (19,56) 18 19 18 1 1/16-18 UNEF 1.516 (38,51) .625 (15,88) .750 (19,05) .770 (19,56) .895 (22,73) 20 21 20 1 3/16-18 UNEF 1.641 (41,68) .625 (15,88) .812 (20,62) .770 (19,56) .957 (24,31) 22 23 22 1 5/16-18 UNEF 1.766 (44,86) .688 (17,48) .938 (23,83) .829 (21,06) 1.083 (27,51) 24 25 24 1 7/16-18 UNEF 1.891 (48,03) .750 (19,05) 1.000 (25,40) .895 (22,73) 1.145 (29,08) METRIC EQUIVALENTS ARE IN PARENTHESIS AND ARE GIVEN FOR GENERAL INFORMATION ONLY TABLE 2 CODE FINISH NOTES FOR SELECTIVE PLATING: - N ELECTROLESS NICKEL (96HRS SALT SPRAY RESISTANCE) 1. CADMIUM/NICKEL INTERFACE SHALL BE COATED WITH POLYSULFIDE SEALANT. CADMIUM OLIVE DRAB OVER ELECTROLESS NICKEL (1000HRS SALT SPRAY W RESISTANCE) 2. AREA FREE OF CADMIUM. ZINC NICKEL BLACK PASSIVATE OVER ELECTROLESS NICKEL (1000HRS SALT Z SPRAY RESISTANCE) P CADMIUM OLIVE DRAB OVER ELECTROLESS NICKEL (SELECTIVE PLATING) R85049/85-16W02 SELECTIVE PLATING BASIC PART NUMBER SEE NOTE 1 SPECIFICATION SHEET CONFIGURATION - (DASH) FOR SELF-LOCKING CONNECTOR SHELL SIZE (TABLE 1) FINISH (TABLE 2) SEE .06 MIN .06 MIN ENTRY SIZE (TABLE 1) NOTE 2 (1,52) (1,52) DIMENSIONS: MATERIAL: SEE P/N BREAKDOWN FINISH: SEE P/N BREAKDOWN DWN:N.HAWKINS 05/06/2019 INCHES CHK: R.STYLES 14/06/2019 TE Connectivity TOLERANCES UNLESS OTHERWISE SPECIFIED: PART NUMBER: APVD: M.PAUL 27/06/2019 R85049/85 SERIES PRODUCT SPEC: GENERAL TOL NAME: LINEAR .01 Connector Accessories, Electrical, Backshell, ANGULAR 1 - Straight, Self-Locking, Shield Band Termination (RFI/EMI), Shrink Boot Accommodation, Category 3B APPLICATION SPEC: SIZE CAGE CODE DRAWING NO RESTRICTED TO - 06090 P29494 WEIGHT: A4 SCALE SHEET REV OF CUSTOMER DRAWING BA 1.5:1 2 2 1469-35 (3/13) RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. ALL RIGHTS RESERVED. COPYRIGHT 20 BY C A THREAD XXXX B C .044 (1,1) MIN