S3P44D10 Teledyne

Series S3P44D10 Three-Phase Output to 10A 440 Vac Cage Clamp Connectors Part Number Description S3P44D10 10A, 440 Vac Part Number Explanation S3P 44 D 10 2 Series Switch Type 1 Line Voltage Output Current Amps FEATURES/BENEFITS NOTES Industry-standard hockey-puck package 1) Line Voltage (maximum) 44 = 440 Vac 2) Switch Type: D = Zero-cross turn-on Spring connectors Three relays in a single package MECHANICAL SPECIFICATION Zero-cross and random turn-on options Common control for all three relays 1.4 0.007 (35.6 0.2) Plugs 0.77 0.007 == .32 0.007 .55 (14) (19.6 0.2) 1.02 (26) .4 (10.3) .4 (10.3) (8.2 0.2) .35 .71 (18) DESCRIPTION .30 (8.9) (7.5) The Series S3P relays are made up of three separate 5 6 relays controlled by a common DC voltage control. 1 2 3 4 They are designed to control 10A AC loads such as .30 (7.5) .43 (11) 1.02 (26) 0.35 (9) resistors and small motors on a mains from 12 to .71 (18) .20 0.1 4.7 8 7 (5) 440 Vac, either single- or three-phase. They are well suited for applications requiring compact size and low 0.05 (1.2) .02 +0.007 (5 +0.2) .22 0.007 2.0 0.003 cost. (5.5 0.2) (5.1 0.1) 1.14 0.02 (29 0.5) 1.75 +0.007 (44.5 +0.2) APPLICATIONS WEIGHT: 3.527 oz. (100g) Heaters Motors Lighting APPROVALS UL is pending. INPUT (CONTROL) SPECIFICATION Min Max Units BLOCK DIAGRAM Control Range 4 30 Vdc Input Current Range 3 90 mA 1 7 Must Turn-Off Voltage 0.8 V zero volt Input Resistance (Typical) 330 Ohms 2 Reverse Voltage 30 V 3 zero volt 4 5 zero volt 8 6 2014 TELEDYNE RELAYS (800) 284-7007 www.teledynerelays.com S3P44D10 Page 1 S3P44D10 072014 Q3 2.3 +0.01 (58.5 +0.3) 1.59 .007 (40.5 0.2) 1.87 0.003 (47.6 0.1)0 C/W 0.2C/W 0.55C/W 0.75 C/W 0.9 C/W 1.2C/W 2.6C/W 2 C/W 4C/W NO HEATSINK (8C/W) Series S3P44D10 Three-Phase Output to 10A 440 Vac Cage Clamp Connectors OUTPUT (LOAD) SPECIFICATION ENVIRONMENTAL SPECIFICATION Min Max Units Min Max Units Operating Range 12 440 Vrms Operating Temperature -40 100 C Peak Voltage 850 Vpeak Storage Temperature -40 100 C Load Current Range .05 10 Arms Input-Ouput Isolation 4000 Vrms Maximum Surge Current Rating (Non-Repetitive) Output-Case Isolation 2500 Vrms (See Figure 5) 120 Apeak On-State Voltage Drop 1.6 V SURGE CURRENT Synchronizing Level 10 V 120 Off-State Leakage Current 0.3 mArms 110 100 Turn-On Time 8.3 ms 90 Turn-Off Time 8.3 ms 80 Off-State dv/dt 500 V/s 70 60 Maximum di/dt (Non-Repetitive) 20 A/ s 50 Operating Frequency 10 440 Hz 40 IT for matching fuse (<8.3ms) 72 AS 30 20 Junction-Case Thermal Resistance 2.1 C/W 10 Junction-ambient Thermal Resistance 11.2 C/W 0 1 10 100 1000 Number of Cycles THERMAL CHARACTERISTICS 50 80 45 85 40 35 30 25 20 15 10 5 0 01234576 8910 0 102030405060708090 100110 120 125 Load Current (Arms) Ambient Temperature ( C) Figure 4 Current derating curves Notes: 1. Electrical speci cations at 25C unless otherwise speci ed. 2. An external MOV is recommended for transient voltage protection. 3. For additional/custom options, contact factory. S3P44D10 Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2014 TELEDYNE RELAYS S3P44D10 072014 Q3 Power Dissipation (W) Overload Current (A) 90 C Max Case Temperature ( C)