TLP222A,TLP222A-2 TOSHIBA Photocoupler Photorelay TLP222A, TLP222A-2 Telecommunications Unit: mm Measurement and Control Equipment Data Acquisition System TLP222A Measurement Equipment The Toshiba TLP222A and TLP222A-2 consist of a gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in a DIP package whose withstanding voltage is 60 V. These photorelays have higher output current rating than phototransistor-type photocoupler hence, they are suitable for use as On/Off control for high current. Normally open (1-form-A and 2-form-A) devices Peak off-state voltage: 60 V (min) Trigger LED current: 3 mA (max) On-state current: 500 mA (max) On-state resistance: 2 (max) Isolation voltage: 2500 Vrms (min) UL recognized: UL1557, File No.E67349 TOSHIBA 11-5B2 Weight: 0.26 g (typ.) Pin Configuration (top view) TLP222A-2 TLP222A TLP222A-2 1 4 1 8 2 7 2 3 3 6 1: Anode 2: Cathode 3: Drain 4 5 4: Drain 1, 3 : Anode 2, 4 : Cathode 5 : Drain D1 6 : Drain D2 TOSHIBA 11-10C4 7 : Drain D3 Weight: 0.54 g (typ.) 8 : Drain D4 Start of commercial production 2002/03 1 2014-09-01 TLP222A,TLP222A-2 Absolute Maximum Rating (Ta = 25C) Characteristics Symbol Rating Unit Forward current I 50 mA F Forward current derating (Ta 25C) I /C 0.5 mA/C F LED Peak forward current I 1 A FP Reverse voltage V 5 V R Junction temperature T 125 C j Off-state output terminal voltage V 60 V OFF TLP222A One channel On-state operation I 500 mA ON current TLP222A-2 Two channel operations Detector TLP222A Forward One channel current operation I /C 5.0 mA/C ON derating TLP222A-2 (Ta 25C) Two channel operations Junction temperature T 125 C j Storage temperature T 55 to 125 C stg Operating temperature T 40 to 85 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 1 minute, R.H. 60%) BV 2500 Vrms S (Note 1) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: LED pins are shorted together. Detector pins are also shorted together. Recommended Operating Conditions Characteristics Symbol MinTyp.MaxUnit Supply voltage V 48 V DD Forward current I 5 7.5 25 mA F On-state current I 500 mA ON Operating temperature T 20 65 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Electrical Characteristics (Ta = 25C) Characteristics Symbol Test Condition Min Typ. MaxUnit Forward voltage V I = 10 mA 1.0 1.15 1.3 V F F LED Reverse current I V = 5 V 10 A R R Capacitance C V = 0, f = 1 MHz 30 pF T Off-state current I V = 60 V 1 A OFF OFF Detector Capacitance C V = 0, f = 1 MHz 130 pF OFF 2 2014-09-01