TLP592A TOSHIBA Photocoupler Photorelay TLP592A Telecommunications Unit: mm Measurement and Control Equipment Data Acquisition System Measurement Equipment The Toshiba TLP592A consists of an infrared emitting diode optically coupled to a photo-MOSFET in a 6-pin DIP package. This photorelay has higher output current rating than phototransistor-type photocoupler hence, it is suitable for use as On/Off control for high current. Normally open (1-form-A) device Peak off-state voltage: 60 V (min) Trigger LED current: 3 mA (max) On-state current: 500 mA (max) On-state resistance: 2 (max) Isolation voltage: 2500 Vrms (min) UL-recognized: UL 1557, File No.E67349 JEDEC Pin Configuration (top view) JEITA TOSHIBA 11-7A8S 1 6 Weight: 0.4 g (typ.) 1: Anode 2: Cathode 2 5 4: Drain D1 5: Source 6: Drain D2 3 4 Schematic 1 6 2 5 4 Start of commercial production 2002-03 2019 1 2019-06-24 Toshiba Electronic Devices & Storage Corporation TLP592A Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Forward current I 50 mA F Forward current derating I /C 0.5 mA/C F (Ta 25C) LED Peak forward current I 1 A FP (100 s pulse, 100 pps) Reverse voltage V 5 V R Junction temperature Tj 125 C Off-state output terminal V 60 V OFF voltage A connection 500 On-state B connection I 500 mA ON current C connection 1000 Detector A connection 5.0 Forward current B connection I /C 5.0 mA/C ON derating (Ta 25C) C connection 10.0 Junction temperature T 125 C j Storage temperature T 55 to 125 C stg Operating temperature T 40 to 85 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage BV 2500 Vrms S (AC, 60 s, R.H. 60 %) (Note 1) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: LED pins are shorted together. Detector pins are also shorted together. Recommended Operating Conditions Characteristics Symbol Min Typ. Max Unit Supply voltage V 48 V DD Forward current I 5 7.5 25 mA F On-state current I 500 mA ON Operating temperature T 20 65 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Circuit Connections 1 6 1 6 1 6 LOAD LOAD LOAD AC 2 5 2 5 2 5 or DC DC DC 3 4 3 4 3 4 A connection B connection C connection 2019 2 2019-06-24 Toshiba Electronic Devices & Storage Corporation