DC/DC Converter THD 10N Series, 10 Watt Wide 2:1 input voltage range Internal EMI-filter meets EN 55022, Class A without external components High efficiency up to 89% Operating temperature range 40C to +85C UL 62368-1 IEC 62368-1 I/O isolation 1 500 VDC The THD 10N series is a range of isolated high performance 10W DC/DC con- Overload protection verters in a low profile DIL-24 package with standard industry pin-out. Other features of this product are built-in overvoltage protection and internal EMI-fil- 3-year product warranty ter to meet EN 55022, class A. Full SMD-design with exclusive use of ceramic capacitors guarantees a high reliability and long product lifetime. Typical appli- cations for these converters are industrial electronics, instrumentation, data communication systems and battery operated equipment with limited space available on the PCB. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. THD 10-1210N 3.3 VDC 2 700 mA 86 % THD 10-1211N 5.1 VDC 2 000 mA 85 % THD 10-1212N 9 - 18 VDC 12 VDC 833 mA 88 % (12 VDC nom.) THD 10-1213N 15 VDC 666 mA 89 % THD 10-1222N +12 VDC 416 mA 12 VDC 416 mA 88 % THD 10-1223N +15 VDC 333 mA 15 VDC 333 mA 89 % THD 10-2410N 3.3 VDC 2 700 mA 86 % THD 10-2411N 5.1 VDC 2 000 mA 85 % 18 - 36 VDC THD 10-2412N 12 VDC 833 mA 89 % (24 VDC nom.) THD 10-2413N 15 VDC 666 mA 89 % THD 10-2422N +12 VDC 416 mA 12 VDC 416 mA 88 % THD 10-2423N +15 VDC 333 mA 15 VDC 333 mA 89 % THD 10-4810N 3.3 VDC 2 700 mA 86 % THD 10-4811N 5.1 VDC 2 000 mA 85 % THD 10-4812N 36 - 75 VDC 12 VDC 833 mA 87 % (48 VDC nom.) THD 10-4813N 15 VDC 666 mA 88 % THD 10-4822N +12 VDC 416 mA 12 VDC 416 mA 87 % THD 10-4823N +15 VDC 333 mA 15 VDC 333 mA 88 % Page 1 / 4 www.tracopower.com September 22, 2021THD 10N Series, 10 Watt Input Specifications Input Current - At no load 12 Vin models: 20 mA typ. 24 Vin models: 15 mA typ. 48 Vin models: 10 mA typ. - At full load 12 Vin models: 940 mA typ. 24 Vin models: 470 mA typ. 48 Vin models: 240 mA typ. Surge Voltage 12 Vin models: 25 VDC max. (1 s max.) 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) Under Voltage Lockout 12 Vin models: 8.5 VDC max. 24 Vin models: 17 VDC max. 48 Vin models: 34 VDC max. Recommended Input Fuse (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Pi-Type Output Specifications Voltage Set Accuracy 2% max. Regulation - Input Variation (Vmin - Vmax) single output models: 1% max. dual output models: 1% max. - Load Variation (0 - 100%) single output models: 1.2% max. dual output models: 1.2% max. (Output 1) 1.2% max. (Output 2) - Voltage Balance dual output models: 2% max. (symmetrical load) Ripple and Noise - single output 3.3 Vout models: 80 mVp-p typ. (20 MHz Bandwidth) 5.1 Vout models: 80 mVp-p typ. 12 Vout models: 100 mVp-p typ. 15 Vout models: 100 mVp-p typ. - dual output 12 / -12 Vout models: 100 / 100 mVp-p typ. 15 / -15 Vout models: 100 / 100 mVp-p typ. Capacitive Load - single output 3.3 Vout models: 1 000 F max. 5.1 Vout models: 1 000 F max. 12 Vout models: 470 F max. 15 Vout models: 330 F max. - dual output 12 / -12 Vout models: 220 / 220 F max. 15 / -15 Vout models: 150 / 150 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Short Circuit Protection Continuous, Automatic recovery Output Current Limitation 110% min. of Iout max. 150% typ. of Iout max. Transient Response - Response Deviation 3% typ. / 5% max. (75% to 100% Load Step) - Response Time 300 s typ. / 600 s max. (75% to 100% Load Step) All specifications valid at nominal voltage, full load and +25C after warm-up time unless otherwise stated. Page 2 / 4 www.tracopower.com September 22, 2021