THL 10-4823WI TRACO Power

DC/DC Converters THL 10WI Series, 10 Watt Features CB Scheme 10 Watt in 1 x 1 package UL 60950-1UL 60950-1 226037 Shielded metal case with isolated baseplate Ultrawide 4:1 input voltage ranges Remote On/Off control Operating temp. range 40C to +75C and up to +85C with heat-sink I/O isolation voltage 1500 VDC Input filter meets EN 55022 class A without external components Cost optimized design Industry standard pinout 3-year product warranty The THL 10WI is a series of general purpose 10 Watt dc/dc-converters packed in the compact 1 x 1 case and is a pin to pin replacement for the popular 1 x 2 size products. The industrial standard pinout, the ultra wide 4:1 input voltage range and the input filter that meets EN 55022 Class A without external components make these converters easy to design in and suitable for to cost optimize many existing and new applications. The models have a remote On/Off control, short circuit and overvoltage protection and are applicable in temperature ranges of up to +75C or +85C with optional mounted heat sink. Typical applications are instrumentation, distributed power ar- chitectures in communication and industrial electronics. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THL 10-2410WI 3.3 VDC 2200 mA 86 % THL 10-2411WI 5.1 VDC 2000 mA 84 % THL 10-2412WI 12 VDC 830 mA 86 % THL 10-2413WI 9 36 VDC 15 VDC 660 mA 87 % THL 10-2415WI (24 VDC nominal) 24 VDC 410 mA 86 % THL 10-2421WI 5.0 VDC 1000 mA 84 % THL 10-2422WI 12 VDC 410 mA 86 % THL 10-2423WI 15 VDC 330 mA 87 % THL 10-4810WI 3.3 VDC 2200 mA 85 % THL 10-4811WI 5.1 VDC 2000 mA 84 % THL 10-4812WI 12 VDC 830 mA 86 % THL 10-4813WI 18 75 VDC 15 VDC 660 mA 87 % THL 10-4815WI (48 VDC nominal) 24 VDC 410 mA 86 % THL 10-4821WI 5.0 VDC 1000 mA 84 % THL 10-4822WI 12 VDC 410 mA 86 % THL 10-4823WI 15 VDC 330 mA 87 % DC/DC Converters THL 10WI Series 10 Watt Input Specifications Input current at no load (at nominal input voltage) 24 V models: 30 mA typ. 48 V models: 20 mA typ. Input current at full load (at nominal input voltage) 24 V 3.3 VDC models: 400 mA typ. 24 V other models: 500 mA typ.. 48 V 3.3 VDC models: 200 mA typ. 48 V other models: 250 mA typ. Start-up voltage / under voltage lockout 24 V models: 9 VDC / 8.5 VDC (or lower) (hysteresis for assertive on) 48 V models: 18 VDC / 17 VDC (or lower) (long term operation at undervoltage will demage the converter ) Surge voltage (1 sec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 class A, FCC part 15, level A without external components Recommended input fuse (slow blow) 24 V models: 2000 mA 48 V models: 1000 mA Output Specifications Voltage set accuracy 2 % Regulation Input variation (Vmin Vmax) 1.0 % max. Load variation single output models: 1.2 % max. (15 100 % load) dual output models: 2.0 % max. (15 100 % balanced load) Minimum load 15 % Ripple and noise (20 MHz bandwidth) 60 mVp-p typ. Temperature coefficient 0.02 %/K Output current limitation >110 % of Iout max. Short circuit protection indefinite, automatic recovery Transient response setting time 300 s typ. (25 % load step change) Maximum capacitive load 3.3 VDC models: 560 F 5 VDC models: 560 F 12 VDC models: 150 F 15 VDC models: 150 F 24 VDC models: 68 F 5.0 VDC models: 220 F (each output) 12 VDC models: 100 F (each output) 15 VDC models: 100 F (each output)