Non-Contacting Hall Effect Single Turn Position Sensor 6120 Series Features: 7/8 diameter Non-contacting Hall Effect Single turn Mulpti le styles available Custom models available Description: The BI Technologies line of single-turn non-contacting hall -eeff ct position sensors is 7/8 in diameter. Custom models are available. The hall-effect technology used makes this set of position sensors ideal for harsh environments where shock levels, vibration and temperature. Applications: Industrial grade joystick HVAC controls Model Styles Available 6121 1/8 Shaft, 1/4 Bushing 6124 6mm Shaft, 3/8 Bushing 6126 1/8 Shaft, 3/8 Bushing 6127 1/4 Shaft, 3/8 Bushing Custom models are available Contact Customer Service for special features Ordering Information TT Electronics BI Technologies General Note Circulo de la Amistad 102 PIMSA IV Mexicali B.C. Mexico C.P 21210 TT Electronics reserves the right to make changes in product specificaoti n without Ph: +1 714 447 2345 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.ttelectronics.com/bi -technologies considered accurate at time of going to print. Issue C 04/2019 Page 1 TT electronics plc Non-Contacting Hall Effect Single Turn Position Sensor 6120 Series 1 Electrical Specifications Output voltage 0.25 Vdc to 4.75 Vdc typical (see Feature Codes table) Output overvoltage limits 10 Vdc to 0.3 Vdc output may be shorted to ground or supply without damage Output current 8 mA max. Output load 1 k min., 10 k typical Input voltage 4.5 to 5.5 Vdc Supply voltage absolute limits 20 Vdc max., -10 Vdc min. 2 Independent linearity 0.5% (0.25% available) Hysteresis 0.2% max. Resolution 0.088 for 360 travel, 0.011 for 45 travel Supply current 7.5 mA typical, 11 mA max. Dielectric strength 750 V rms Insulation resistance 1,000 meg min. Electrostatic discharge (ESD) Passes 2 kV human body model and 15 kV air discharge Bulk current injection (BCI) Passes 2-500 MHz at 200 mA Actual electrical travel 360 typical (see ordering information) Temperature coefficient of output voltage 20 ppm/C Mechanical Specifications Total mechanical travel 360 continuous (320 with stop feature) Bearing Bearing bronze bushing Weight 0.6 oz. typical Static stop strength 40 in. oz. Panel nut tightening torque 25 in. lb. max. Supply voltage absolute limits 20 Vdc max., -10 Vdc min. Independent linearity 0.5% (0.25% available) Hysteresis 0.2% max. Resolution 0.088 for 360 travel, 0.011 for 45 travel TT Electronics BI Technologies General Note Circulo de la Amistad 102 PIMSA IV Mexicali B.C. Mexico C.P 21210 TT Electronics reserves the right to make changes in product specificaoti n without Ph: +1 714 447 2345 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.ttelectronics.com/bi -technologies considered accurate at time of going to print. Issue C 04/2019 Page 2 TT electronics plc