OPA779 Series Display Lighting Features: 12 V DC input Low power consumption Custom lengths up to 72 long Flying leads for easy connections Various standard lengths The OPA779 Series is a scalable lighting solution for the general lighting industry. The OPA779 Series emits a uniform consistent white lighting pattern within its length providing exceptional lighting for retail displays, refrigeration, and general lighting while reducing energy consumption as compared to traditional lighting systems. The OPA779 is scalable as a single unit or as multiple single units connected together. This connectivity allows for easy retrofitting of existing lighting systems as well as fitting to new designs. Any combination of lengths may be connected in series up to 24W or 2 A maximum. The OPA779 is an acrylic water resistant lighting assembly suitable for dry and damp locations. Typical LED pitch is 1.5 38mm . Applications General illumination Retail display Architectural accent lighting Under-counter lighting Refrigeration Mobile food service Point-of-sale displays Length OPA779 P/N Watts Device Type 0.25 Evaluation Unit with Connector OPA779S-240 9.5 0.5 Single-Ended (Connection Drawing page 2) Connection Only Certifications/Reports LM-80 OPA779D-610 23.5 1 Double-Ended IP-62 Connection LM-79 Flying Leads EN62471:2008 45.5 2 OPA779D-1169 UL E351728 S = Single-ended flying leads D = Double=ended flying leads Notes: Maximum storage and operating temperature 0 ~ +70C DO NOT LOOK DIRECTLY RoHS AT LED WITH UNSHIELDED ESD threshold (HBM) 2000V EYES OR DAMAGE TO 12V power supply not included and is dependent on length with lengths RETINA MAY OCCUR. larger than 240mm(9.5) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue E 09/2012 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED optekinc.com www.optekinc.com Page 1 of 2 OPA779 Series Retail Display Light (RDL) OPA779 Standard Lengths Number of LEDs Color Typical Total Luminous Per Device Temperature Current at Flux (lm) Optek Part Number 12VDC 6 5000K 35mA 40 OPA779S-240 To 15 85mA OPA779D-610 90 7000K 30 175mA OPA779D-1169 180 **Contact Optek or an authorized distributor to discuss your custom application. Optek Technology recommends Keystone Electronics Nylon Cable Clip 7635 or equivalent for mounting. Evaluation Unit Output connector 2.1mm ID / 5.5mm OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue E 09/2012 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED optekinc.com www.optekinc.com Page 2 of 2