Slotted Optical Flag Switch OPB680, OPB680-20, OPB690Z Features: Phototransistor output OPB680 Mechanical switch replacement Enhanced signal to noise ratio Printed PCBoard mounting (OPB680, OPB680-20) Lever force options(OPB680, OPB680-20) OPB690 3-pin connector, 0.98 (2.5mm) Mates with Molex 22-01-1032 and terminal 08-70-0069 Description: Each OPB680, OPB680-20 and OPB690Z optical flag switch consists of an infrared emitting diode in a molded plastic housing. The phototransistor has an enhanced low current roll-off that improves contrast ratio and immunity to background irradiance. A lever arm actuated flag interrupts the light beam and switches the output between states that can readily drive logic gates. This can be actuated by passing a paper sheet without damaging the papers edge. OPB680-20 offers increased lever operating force that prevents false triggering due to incidental contact in door sensing and other heavy-duty applications. OPB690Z is designed to easily snap mount into a 0.037 0.001 (0.940 mm 0.025 mm) thick material with a rectangular opening of 0.320 0.003 x 0.472 (8.128 mm x 11.989 mm) minimum. Insertion into the punched side of metal is recommended. Customized lever arms and spring torques can be designed for specific applications for each of the devices. Custom electrical, wire, cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: Ordering Information Mechanical switch replacement Flag Travel Lead Length / Speed indication (tachometer) Part LED Peak Degrees Spacing or Number Wavelength Sensor Max Connector Mechanical limit indication Edge sensing OPB680 51 0.100 / 0.275 Rbe OPB680-20 890 nm Transistor OPB690Z 70 Molex 5102 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A 12/06 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 3 Slotted Optical Flag Switch OPB680, OPB680-20, OPB690Z OPB680, OPB680-20 1 3 4 2 Pin Description Pin Description 1 Anode 3 Collector 4 Cathode 2 Emitter MILLIMETERS DIMENSIONS ARE IN: INCHES Notes: (1) For OPB680 and OPB680-20, the on condition exists when the lever arm is in the rest position (16 from vertical). (2) For OPB680 and OPB680-20, the off condition exists when the lever arm is deflected clockwise 8 3 from the rest position (16 from vertical). Maximum allowable deflection is 35 from the rest position. OPB690Z 1 2 3 Pin Description 1 Anode 2 Collector 3 Ground Notes: (1) For OPB690Z, the on condition exists when the lever arm is deflected clockwise 18 +/-3 from the rest position (20 from vertical). (2) For OPB690Z, the off position exists when the lever arm is in the rest position (20 from vertical). (3) For OPB690Z, from the rest position to the switch point the lever torque measured at the end of the arm is 1.5 grams maximum. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 12/06 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 3 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com