Wide Gap Slotted Optical Switch OPB800 (L and W Series) W Package Features: 0.375 (9.525 mm) wide gap Choice of aperture size L Package Choice of minimum photocurrent Choice of opaque or IR transmissive shells Available for PCBoard mounting or with 24 26 AWG wires Description: The OPB800L series, PCBoard mounting, of wide gap switch provides the flexibility of a custom device from a standard product line, while the OPB800W series, remote mounted, switch offers 24 (610 mm) 26 AWG wire interconnect. Building from a standard housing that utilizes a 0.375 (9.5 mm) wide slot, a user can specify the electrical output parameters, discrete shell material and the aperture width. Housings are made from an opaque grade of injection -molded plastic that minimizes the assembly s sensitivity to visible and near-infrared ambient radiation. Discrete shells, which are exposed on parallel faces inside the device throat, are made of IR transmissive plastic (for applications where aperture contamination may occur) or of opaque plasc wti ith aperture openings (for maximum protection against ambient light). CONTAINS POLYSULFONE Applications: To avoid stress cracking, we suggest using ND Industries Vibra- Non-contact interruptive object sensing Tite for thread-locking. ND Vibra-Tite VC-3 evaporates fast with- Assembly line automation out causing structural failure in OPTEKs molded plastics. Machine automation Equipment security Machine safety Part Number Guide OPB 8 X X X X X Z For W series only Optek Assembly Sensor Aperture: 1 0.010 (.254 mm) 5 0.050 (1.270 mm) Phototransistor Output Family Emitter Aperture: 5 0.050 (1.270 mm) Discrete Shell Material: Mounnti g conguratiofi ns: 0 Transmissive plastic L Solder lead termination Discrete shell W Wire termination Electrical Specification Variations: 1 Opaque plastic 0 = Electrical Parameter A Discrete shell 1 = Electrical Parameter B 2 = Electrical Parameter C Note: Assemblies with 0.010 apertures are currently available with electrical parameter A only. Wires = 26AWG24 Long General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Rev C 08/2020 Page 1 TT electronics plc Form 500-1080-001 Rev - 06/2019 Wide Gap Slotted Optical Switch OPB800 (L and W Series) Electrical Specifications Absolute Maximum Ratings (T = 25 C unless otherwise noted) A Storage and Operating Temperature L Series -40 C to +85 C W Series -40 C to +80 C (2) Lead Soldering Temperature 1/16 inch (1.6 mm) from the case for 5 sec. with soldering iron 260 C Input Diode Forward DC Current 50 mA Peak Forward Current (1 s pulse width, 300 pps) 3 A Reverse DC Voltage 2 V (1) Power Dissipation 100 mW Output Phototransistor Collector-Emitter Voltage 30 V Emitter -Collector Voltage 5 V Collector DC Current 30 mA (1) Power Dissipation 100 mW 1 3 Color/Pin Description Red-1 Anode Black-2 Cathode White-3 Collector Green-4 Emitter 2 4 General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Rev C 08/2020 Page 2 TT electronics plc Form 500-1080-001 Rev - 06/2019