OPF340A TT Electronics

Fiber Optic Transmitter OPF340 Series OPF340 Series Low Cost 850 nm LED technology Hermetic metal can package High thermal stability High optical coupling efficiency to multimode fiber Industrial temperature range 55 MHz Bandwidth The OPF340 series fiber optic transmitters are high performance devices packaged for data communication links. This trans- mitter is an 850 nm GaAlAs LED and is specifically designed to efficiently launch optical power into fibers ranging in size from 50/125m up to 200/300m diameter fiber. Multiple power ranges with upper and lower limits are offered which allows the de- signer to select a device best suited for the application. This products combination of features including high speed and efficient coupled power makes it an ideal transmitter for inte- gration into all types of data communications equipment. Applications Industrial Ethernet equipment Copper-to-fiber media conversion Intra-system fiber optic links Video surveillance systems Typical Coupled Power I = 100mA, 25C F Fiber Size Type N.A. OPF340A OPF340B OPF340C OPF340D 50/125 m Graded Index 0.20 25W 18W 12.5W 7.5W 62.5/125 m Graded Index 0.28 45W 34W 22W 14W 100/140 m Graded Index 0.29 125W 95W 62W 38W 200/300 m Step Index 0.41 475W 340W 235W 140W OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A 03/2011 Phone: (800) 341-4747 FAX: (972) 323 2396 sensors optekinc.com www.optekinc.com Page 1 of 3 Fiber Optic Transmitter OPF340 Series Absolute Maximum Ratings o T = 25 C unless otherwise noted A Storage Temperature Range -55 C to +150 C Operating Temperature Range -40 C to +125 C (1) Lead Soldering Temperature 260 C (2) Continuous Forward Current 100 mA Maximum Reverse Voltage 1.0 V Electrical/Optical Characteristics (T = 25 C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS OPF340A 20.0 25.0 Total Coupled Power OPF340B 15.0 18.0 (3) P W I = 100 mA F T50 OPF340C 10.0 12.5 50/125 mm Fiber NA = 0.20 OPF340D 5.0 7.5 Forward Voltage 1.8 2.2 V I = 100 mA V F F Reverse Voltage 1.8 V I = 100 A V R R Wavelength 830 850 870 nm I = 50 mA F Optical Bandwidth 35 nm I = 50 mA F (4) Rise and Fall Time 4.5 6.0 ns I = 100 mA 10% to 90% t ,t F r f Notes: 1. Maximum of 5 seconds with soldering iron. Duration can be extended to 10 seconds when flow soldering. RMA flux is recommended. 2. De-rate linearly at 1.0mA / C above 25 C . 3. The component must be actively aligned into the mating fiber cable assembly to achieve optimal performance. 4. No Pre-bias. 5. All Optek fiber optic LED products are subjected to 100% burn-in as part of its quality control process. The burn-in conditions are 96 hours at 100mA drive current and 25C ambient temperature. Relative Coupled Power vs. Typical Forward Voltage vs. Forward Current Forward Current 2.0 1.4 Temperatures are Stepped Temperatures are Stepped -40C 1.9 1.2 in 20 C increments. in 20 C increments. 1.8 1.0 1.7 0.8 1.6 -40C 80C 0.6 1.5 0.4 1.4 80C 0.2 1.3 0 1.2 0 20 40 60 80 100 20 40 60 80 100 0 Forward Current (mA) Forward Current (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A 03/2011 Phone: (800) 341-4747 FAX: (972) 323 2396 sensors optekinc.com www.optekinc.com Page 2 of 3 Relative Coupled Power Relative Coupled Power