OPF480 TT Electronics

Fiber Optic Detector OPF480 Features: Electrically isolated plastic cap package High speed, low capacitance Designed to self align in the 0.228 diameter bore of standard fiber optic receptacles. Press fit simplified component installation 100MHz operation maximum Description: The OPF480 is a low noise silicon PIN photodiode mounted in a low cost package for fiber optic applications. It offers fast response at moderate bias and is compatible with LED and laser diode sources in the 800 -1000 nm wavelength region. Low capacitance improves signal to noise performance in typical short haul LAN applications. The OPF480 is designed to be compatible with multimode optical fibers from 50/125 to 200/230 microns. Applications: Industrial Ethernet equipment Copper-to-fiber media conversion Intra-system fiber optic links Video surveillance systems MILLIMETERS DIMENSIONS ARE IN: INCHES General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Rev E 11/2019 Page 1 TT electronics plc Form 500-1080-001 Rev - 06/2019 Fiber Optic Detector OPF480 Electrical Specifications Absolute Maximum Ratings (T = 25 C unless otherwise noted) A Storage Temperature Range -55 C to +115 C Operating Temperature Range -40 C to +100 C (1) Lead Soldering Temperature 260 C (2) Continuous Power Dissipation 200 mW Maximum Reverse Voltage 100 VDC Electrical Characteristics (T = 25 C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS R Responsivity 0.45 0.55 A/W V = 5.0V 50/125m fiber l = 850nm R I Dark Current 0.1 5.0 nA V = 5.0V D R Peak Response Wavelength 905 nm l p t Output Rise Time 2.0 ns V = 5V R = 50, 10%-90% r R L C Total Capacitance 1.5 2.0 pF V = 5V T R FoV Field of View 80 deg Notes: 1. Maximum of 5 seconds with soldering iron. Duration can be extended to 10 seconds when flow soldering. RMA flux is recommende d. 2. De-rate linearly at 2.13mW/C above 25C . General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Rev E 11/2019 Page 2 TT electronics plc Form 500-1080-001 Rev - 06/2019