OPIA800OPIA803, OPID804 DIP Package Features: 2,500 or 5,000 Vrms electrical isolation Choice of a Single and Dual LED Choice of Phototransistor or Photologic Sensor Low-cost plastic Dual-In-Line (DIP) package Agency Approvals: UL Certification No: E58730 VDE NO: 40026713, 40026624 Description: The OPIA800 through OPID804 optocouplers are designed for applications that utilize a digital output (Phototlogic ) in a dual-in-line package. Isolation voltage from 2,500 to 5,000 Volts RMS product are designed for some of the most stringent power system isolation requirements. Theory of operation: The LED transmitter is used to illuminate the Photosensor providing electrical isolation between two power systems while maintaining the ability to transmit information from one power system to the other. In many applications, analog or digital signals may be required to be transmitted between two power systems while maintaining isolation between the power systems up to 5,000 volts RMS. A variety of LED and photosensor configurations are available depending on the system requirements The ratio Current Transfer Ratio (CTR) is determined using the output current and input current for analog photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device. Photosensor Current 20mA CTR = = *100 = 200 LED Current 10mA All DIP product is shipped in a shipping tube with TU identified on the end of the part number. Example: OPIA800DTU is a 8-Pin DIP shipped in a tube (TU). Industrial equipment power isolation Applications: Medical equipment power isolation High voltage isolation Office equipment PCBoard power system isolation 1 Moisture RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A.5 02/2010 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 20 OPIA800OPIA803, OPID804 DIP Package Analog Output Devices Ordering Information Isolation Voltage CTR Typ. Tplh / Tphl (ns) Part Number Package Configuration Max. (Vrms) Min/Typ/Max R = ohms L OPIA800 2,500 300 / 1,600 / - 7 / 2 2.2 K 8 Pin DIP A KK A B C E (Dar) OPIA801 2,500 500 / 1,600 / - 10 / 5 4.7 K 8 Pin DIP A KK A B C E (Dar) OPIA802 2,500 15 / 43 / - 0.3 / 0.3 1.9 K 8 Pin DIP A KK A C E OPIA803 2,500 5 / 43 / - 0.4 / 0.3 4.1 K 8 Pin DIP A KK A C E Digital Output Devices Ordering Information Isolation Voltage Typ. Tr / Tf (ns) Typ. Tplh / Tphl (ns) Part Number Package Configuration Max. (Vrms) R = 350 ohms R = ohms L L 30 / 30 OPID804 5,000 45 / 45 350 8 Pin DIP A KNAND Configuration: Definition of Terms LED IdentificationSensor Identification LED A = Anode K = Cathode 10K Logic 10K Inverted Logic NAND Gate NAND Gate Sensor K = Cathode A = Anode B = Base C = Collector E = Emitter Packaging Example: OPID606DTR Part Number Suffix: D = DIP, TU = Ship in Tubes, TR = Ship on Tape and Reel Pin Part Number 1 2 3 4 5 6 7 8 OPIA800 A K E C C-B K-C OPIA801 A K E C C-B K-C OPIA802 A K E C A-B K OPIA803 A K E C A-B K OPID804 A K GND Output Enable Vcc Package Outline Dimensions and Schematics: Top-View Symbol Definition A Anode B Base DIMENSIONS ARE IN: INCHES MILLIMETERS C Collector TOLERANCE: 0.008 INCHES 0.2 MILLIMETERS E Emitter OPIA802 K Cathode OPIA803 OPID804 OPIA800 OPIA801 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 02/2010 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 20 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com