warranty information Ultimate Support Systems offers a Limited Lifetime Warranty on TS-90 SERIES. For Full Details, Exclusions and Limitations as well as information on Obtaining Warranty Service, please see full warranty details available online at www.ultimatesupport.com. To purchase the Ultimate Protection Plus Premium Service and Support Plan, please visit www.ultimatesupport.com or call customer support at 800-525-5628 for more information. Product Manual for Ultimate Support warranty registration Visit www.ultimatesupport.com for a quick and convenient process for registering your TS-90 SERIES new Ultimate Support product. Warranty Registration and Proof of Purchase are required for warranty fulfilment. Full Limited Lifetime Warranty and Ultimate Protection Plus TELELOCK Premium Service and Support Plan details are available online. STANDARD SPEAKER STAND TS-90B ITEM 13908 TALL SPEAKER STAND TS-99B ITEM 13910 TALL LEVELING LEG SPEAKER STAND TS-99BL ITEM 13642 970.776.1920 . www.ultimatesupport.com . Copyright 2009, Ultimate Support Systems . All Rights Reserved Revision 6, 03.21.09 . Product Manual Item SPK90-M 4special set-up instructions accessories STEP 1 Speaker Stand 1 Open leg fitting lock lever. Mounting Bracket 1. Occasionally clean the stand with a damp BMB-200K ( 10766) cloth or non-abrasive cleaner. External bracket securely mounts any speaker cabinet with a flat bottom on 2. When loading the stand, ONLY add the an Ultimate Support speaker stand. speaker when the stand is in a fully upright STEP 2 position (all legs on the floor). 2 Turn stand upside down and pivot legs so Ultimate Support label 3. Do not drag the stand while it is loaded faces you. this could break the fittings and result in Speaker Stand Socket damage to the stand which will not be Mounting Bracket covered under warranty. TSM-150MK ( 13421) STEP 3 TSM-138MK ( 13425) 4. Check that the leg collar is securely locked 3 Turn stand upright and slide leg fitting to adjust diameter of leg Internal metal bracket securely mounts when supporting equipment. spread. Leg braces should be parallel to floor for maximum stability. any speaker cabinet with a flat bottom Close lock lever. 5. Always release the TeleLock collar with on an Ultimate Support speaker stand. caution and stand clear of the load. 6. The stand is equipped with a tube lock STEP 4 which prevents accidentally pulling out the 4 The built-in adapter fits both 1-1/2 or 1-3/8 internal diameter speaker center tube. sockets. Use the lower position for 1-1/2. For 1-3/8 sockets, depress Zippered Tote Bags push buttons and raise adapter until it locks in raised position. Heavy-duty, padded, zippered Tote Bags BAG-90 ( 15691) lighting tree STEP 5 Holds one TS-90B Speaker Stand. 5 Line up arrow TeleLock collar with RAISE. Then raise center tube 10.5 x 49.5 (267 mm x 1257 mm) 6-10. Put speaker cabinet on top of the stand and raise the cabinet BAG-90D ( 15693) Turn a Tall TS-99B, or TS-99BL Speaker to desired height. Set to LOCK position. Holds two TS-90B Speaker Stands. Stand into a Lighting Tree. 14.5 x 49.5 (368 mm x 1257 mm) BAG-99 ( 15692) For a Single-Tier Lighting Tree add: Holds one TS-99B/TS-99BL Speaker Stand. STEP 6 LTB-48B ( 14107) 6 10.5 x 60.5 (267 mm x 1537 mm) To lower speakers, SLOWLY rotate arrow on TeleLock collar to 48 Lighting Crossbar LOWER position until speaker starts to lower. To slow descent, BAG-99D ( 15694) For a Two-Tier Lighting Tree add: turn collar toward the RAISE position. When ready to remove the Holds two TS-99B/TS-99BL Speaker Stands. LTV-24B ( 14108) 24 Vertical Extension speaker, rotate collar to LOCKED position. 14.5 x 60.5 (368 mm x 1537 mm) LTB-48B ( 14107) 48 Lighting Crossbar On TS-99BL Leveling Leg Stand, 3rd leg adjusts to level stand on uneven LTB-24B ( 14106) 24 Lighting Crossbar Pair surfaces. Untighten leg telescoping collar, lengthen leg and retighten knob. 2 3