CATALOG 128 CATALOG 128.qxd 4/24/2014 10:10 AM Page 34 tm Non EMC DIN-Based VectorPak Subracks Vector subrack packaging for 19 systems offers a versatile and com- prehensive solution to your packag- ing needs. Based on DIN 41914, all parts conform to a system which allows your unique design to be constructed from a combination of standards. You may mix different module sizes and add accessories without the need for special designs. Subracks and accessories are available off the shelf, afford- ing you short lead times for on time completion of your project. COMPLETE DIN SUBRACKS FULLY ASSEMBLED OR KITS CCK Card Cage (subrack) frame only kit including sidewalls, front, rear and rear-center extrusions, all tm nut strips, backplane insulators and assembly instructions. CG1-series VectorPak card guides sold separately. Guide positions are variable at 1HP (0.200) horizontal increments. CCA Card cage (subrack) frame only described above , but factory assembled. tm CG1-series VectorPak card guides sold separately DIN-Based Metric Subrack Ordering Information - CCK 160 3U Rack Height Model Type 3U = 5.25H x 19.0W CCK- Card cage frame kit 6U = 10.50H x 19.0W CCA- Factory Assembled 9U = 15.75H x 19.0W tm VectorPak Kit (CCK) Card Depth Standard Card Heights 160 -160mm, 6.299 3U = 100mm (3.94) 220 -220mm, 8.66 6U = 233.35mm (9.187) 280- 280mm, 11.02 9U = 366.70mm (14.437) 340- 340mm, 13.39 400- 400mm, 15.75 CCA160-6U shown with 1 pr. of CG1-160 card guides installed CCA160-3U shown with 1 pr. of CG1-160 card guides installed 34 www.vectorelect.com 800-423-5659 Specification subject to change without notice NON EMC SubracksNON EMC Subracks CATALOG 128 CATALOG 128.qxd 4/24/2014 10:11 AM Page 35 tm Non EMC DIN-Based VectorPak Subracks TM ALL VECTORPAK 19 DIN SUBRACK COMPONENTS AVAILABLE SEPARATELY AC160-84-1 Perforated Covers AC160-84-2 Solid Covers Insulator 5250998-84 DP Dress Panels Rear Extrusion 5250238-84 Rear Center Extrusion 5250237-84 CG1-160 Card Guides 5700202 or 5250268-84 Nut Strip HA19 Rack Handles Side Panel Front Extrusion 5250236-84 Part No. Description 5250236-84 DIN Front horizontal Extrusion 5250238-84 DIN Rear horizontal Extrusion 5250237-84 DIN Center horizontal Extrusion 5250268-84 M2.5 Nut Strip, 17.0 or 5700202 AS1/2 5250268-84 M2.5 Nut Strip, cut less than 17.0 in 0.20 increments 1HP) 5250998-84 Backplane Insulation Strip, 17.0 AS1/2 The above items are available in 0.800 (4HP) to 17.0 (84HP) and tm attach to VectorPak sidewalls (Page 38) with 8-32 screws (HD94) Attractive & Rugged Outer Enclosures Available for 3U, 6U or custom subracks Accepts up to 19 wide subracks with rackmount brackets. Many choices of paint colors - Contact factory. SE1588 4U for 8.4W Subrack SE1422 3U x 14D for 19W Subrack tm SE1322 SE1588 with VectorPak 3U x 22D for 19W Subrack CCA26 and CG3 card guides Specification subject to change without notice 35 www.vectorelect.com 800-423-5659