2.5mm cord diameter, black PVC insulation Conductor is high strength 7-strand tinsel wire for strength and durability No built-in resistors Resistance: < 20 ohms (without a current limiting resistor) it is recommended to measure the ground cord resistance in combination with EPA ESD control item (such as a working surface) Both cord ends terminated with 10mm snap socket Item Description VER-26975 CORD,STRAIGHT,0.7M,10MMSOCKET/ 10MMSOCKET,0 MEG VER-26973 CORD,STRAIGHT,0.5M,10MMSOCKET/ 10MMSOCKET,0 MEG Once the ESD ground reference has been verified it is important to ensure that each of the ESD control items used is connected to the ground reference. First ensure that each ESD control item is connected to the ground reference. Next, using the test method or standard and limits for each ESD control item given in Tables 2 and 3 of IEC 61340-5-1,verify that the resistance to ground (or to the common connection point) meets the required limit. CLC/TR 61340-5-2 User guide Unless otherwise noted, tolerance is 10% Made in the Verification of ESD grounding system clause 4.4.5 United Kingdom Specifications and procedures subject to change without notice. Link Cords, 10mm Socket, 10mm Socket VERMASON DATE: UNIT C, 4TH DIMENSION, FOURTH AVENUE, LETCHWORTH, Drawing Number HERTS, SG6 2TD UK September PHONE: +44 (0) 1462-672005 VER-26975 2015 E-MAIL:Service Vermason.co.uk, INTERNET: Vermason.co.uk 2014 VERMASON.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for vermason manufacturer: Other Similar products are found below : 203015 237670 230260 238711 35594 230660 072425B 50424 242296 229775 J6609 VER-29082 47200 231725 231250 242270 47201 230480 203065 237200 229100 249205 230310 229795 230647 230370 231275 237675 231280 35267 242278 231345 35595 229135 230646 VER-26457 230420 35592 35622 241030 241100 ASBB4