KM6-II Subracks: Accessories PCB GrOundInG ClIP KM6-EC This grounding clip can be inserted into the front or rear of compatible 1,6mm pcb guides in KM6-II and KM6-EC subracks. PCB Grounding clip Features Electrostatic Protection Occupies unused area of Eurocard No screws required Contacts on the clip provide electrical continuity between a suitably equipped Eurocard and, via a spring under the clip to standard front extrusions. Pcbs can, therefore, be grounded before the engagement of connectors. The clip, which is supplied in packs of 10, fits into a pocket in the guide and requires no screw fixings to maintain contact. Detail of grounding strip requirements on a standard Eurocard - 0.5 wiring and/or component side The modification required to the pcb takes the form of a conductive strip along the edge of the board, either on the left or right side (see illustration). The clip has been tested to IEC 950: 1986 section 2.5.11. In testing, the clip reached a steady temperature of 76 degrees C at 15A, with a resistance path of 7m . A typical electrostatic discharge would be 12A for a period of 1 microsecond. (160) (160) 153.67 2.76 (153.67) It should be noted that the clip is designed to provide a ground path for 5 70 0.5 0.5 electrostatic charges, not for a power short circuit or as a ground rail. Contents of kit Component side Component side Rear Description Material/Finish Rear Grounding clip 0,15mm spring steel plated Ordering information Description Qty. Order code Grounding clip pk 10 950-251366F ESD contact breaks before ESD contact maintained during connector engagement connector engagement POsItIve GuIde retentIOn taPPed strIPs PCB ESD Contact strips top / bottom All KM6-II guides, with the exception of the 2,4mm slot version, can be bolted down to a tapped strip in the front extrusion to give shock and vibration resistance. Tapped strips (supplied singly) should be selected by subrack width. The screw used is M2,5 x 5mm cheesehead, supplied in a packet of 100. Positive guide retention tapped strips Ordering information Description: Positive guide retention Type Width Qty. Order code Tapped strip 42HP 1 173-12706H Standard 84HP 1 173-12704C 24HP 1 950-202799L 42HP 1 950-202739G Universal 60HP 1 950-202740L 84HP 1 950-202001E Security fixing screws M2,5 x 5 100 173-202579H Note: for other widths and for divider kits, a longer strip should be cutdown to suit. Screw retention of guides in a KM6-II subrack 33 Tel: +44 (0)2380-246900 sales verotec.co.uk 1.5 2.5X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for vero manufacturer: Other Similar products are found below : 173-202579H 503-232983F 503-232948H 503-232971B 20-313145 16-269316 503-232963A 75-265742 75-38118 950-201784G 16- 269313 75-265739 503-232946A 20-313139 18-1657 20-313138 20-313144 75-227911 18-0222 645-10028 75-265740 01-0042 75-3019 75-227895 75-227901 503-232985B 20-313140 75-227910 503-232954B 20-313143 01-0021 20-2136 20-313137 75-2861 75-226685 950-202001E 75-2860 20-2137