Model 15
www.vishay.com
Vishay Spectrol
Rectangular 10 Turn Dial (3 Digit), (4 Digit) 100 Turn
FEATURES
Rectangular digital scale
1" wide
1 1
/ or / or metric (6 mm) shaft adapter
4 8
Open or clear plastic window bezel
Black anodize finish with standard or white bezel trim
Satin clear anodize finish
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA OPERATIONAL SPECIFICATIONS
Sensor type DIALS Operation 3 digit
(10 turn)
Market appliance Industrial
Left digit Complete revolutions of turning knob
Dimensions 25.4 mm x 49.5 mm Right two digits Percent of revolution
The unit registers a total count of 999
Operation 4 digit
MECHANICAL SPECIFICATIONS
(100 turn)
PARAMETER
Left two digits Complete revolutions of turning knob
Right two digits Percent of revolution
The numerals shall be white
The unit registers a total count of 9999
Numerals on a black background and
The indication shall increase with clockwise
0.130" H (3.30 cm)
Rotation
rotation of the turning knob
The spring detented knob shall be
Graduation lines adjacent to the numerals on
removed using a straight pull, exposing
Accuracy the right digit wheel indicate settings 0.2 % of
Mounting two no. 4 to 40 hex socket set screws
a revolution of the turning knob
for mounting the dial directly to the
Dial phased by rotating the exposed
component shaft
component shaft to correspond with the
Phasing
desired reading on the dial prior to tightening
Weight 1.6 oz. (45.36 g)
the set screws
DIMENSIONS in inches (millimeters)
0.812 MIN.
(20.62)
COVER
0.015
0.015
1.000
+ 0.000
0.625
(25.40)
- 0.015
(15.88)
0.125 (3.18)
0.093 (2.36)
BASE
WINDOW BEZEL
0.094
0.015
(2.39)
1.750
0.750
1.280 (32.51)
TURNING KNOB
(44.45)
(19.05)
1.950 MAX.
0.495
0.695 (17.65)
(49.53)
(12.57)
+ 0.002
1
0.250 (6.35)
- 0.00
0.002
0.128
0.750 (19.05) BRAKE LEVER KNOB
0.165 (4.19)
(NO. 30 DRILL) (3.25)
ON
OFF
0.135 (3.42) SETSCREWS 2 PLCS
C
COMPONENT SHAFT HOLE
L 90 APART TRAVEL
0.015
MOUNTING
5.95 (15.11)
HOLE PATTERN
1.000 MAX.
(25.40)
ORDERING INFORMATION/DESCRIPTION
15 A 1 1 B010 e
SHAFT DIAMETER
MODEL BEZEL FINISH PACKAGING LEAD FINISH
AND NUMERCIAL DISPLAY
1
A / dia. 3 digit
4
1
B / dia. 4 digit 1. Satin clear anodize
4
1
C / dia. 3 digit 1. Open 3. Black anodize, white
8
1
D / dia. 4 digit 3. Clear plastic window bezel trim
8
E 6 mm dia. 3 digit 5. Black anodize
Example: 15 - A - 1 - 1
F 6 mm dia. 4 digit
SAP PART NUMBERING GUIDELINES
15 A 1 1 B10
MODEL SHAFT DIAMETER BEZEL FINISH PACKAGING
Revision: 04-Jul-12 Document Number: 57086
1
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customers responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s
technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk .
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2019 Document Number: 91000
1