CCF50732RFKR36 Vishay

CCF50 www.vishay.com Vishay Dale Metal Film Resistors, Industrial, 1 % and 5 % Tolerance FEATURES 0.33 W power rating 100 ppm/C standard, 50 ppm/C available upon request Superior electrical performance Flame retardant epoxy conformal coating Standard 4 or 5 band color code marking for ease of identification after mounting Tape and reel packaging for automatic insertion (52.4 mm inside tape spacing per EIA-296-E) Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING MAXIMUM WORKING TEMPERATURE RESISTANCE GLOBAL HISTORICAL TOLERANCE (2) (1) P VOLTAGE COEFF. RANGE E-SERIES 70 C MODEL MODEL % W V ppm/C 96 for 1 % CCF50 CCF-50 0.33 200 100 1, 5 10 to 1M 24 for 5 % Notes (1) 50 ppm/C on request (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. TECHNICAL SPECIFICATIONS PARAMETER UNIT CCF50 Rated Dissipation at 70 C W 0.33 Maximum Working Voltage V 200 Insulation Voltage (1 Min) V > 500 eff Dielectric Strength V 450 AC 11 Insulation Resistance 10 Operating Temperature Range C - 65 to + 165 Weight g 0.11 max. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CCF50301RFKR36 (preferred part numbering format) C C F 5 0 301 R F K R 3 6 TOLERANCE TEMPERATURE GLOBAL MODEL RESISTANCE VALUE PACKAGING SPECIAL CODE COEFFICIENT Blank = Standard CCF50 F = 1 % H = 50 ppm R = E36 = Lead (Pb)-free, J = 5 % (Dash Number) K = k K = 100 ppm T/R (5000 pieces) M = M (up to 3 digits) R36 = Tin/Lead, 10R0 = 10 From 1 to 999 T/R (5000 pieces) 680K = 680 k as applicable 1M00 = 1.0 M Historical Part Number example: CCF-503010F (will continue to be accepted) CCF-50 3010 F R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Note For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc 31544). Revision: 15-Nov-12 Document Number: 31014 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 CCF50 www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) A E D C B (Max.) DIMENSION INCHES MILLIMETERS A 0.133 0.010 (3.3 0.025) B 0.062 0.004 (1.57 0.10) C (Max.) 0.143 (3.63) D 0.020 0.002 (0.51 0.05) E 1.125 0.040 (28.58 1.02) 120 120 100 100 80 80 60 60 40 40 20 20 0 0 0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1 1.125 - 65 - 50 25 0 25 50 70 75 100 125 150 165 175 200 APPLIED POWER IN W AMBIENT TEMPERATURE IN C THERMAL RESISTANCE DERATING MARKING Color code marking with 5 color bands for 1 % product and 4 color bands for 5 % product PERFORMANCE (1) TEST MAXIMUM R (TYPICAL TEST LOTS) Thermal Shock 0.1 % Short Time Overload 0.1 % Low Temperature Operation 0.1 % Moisture Resistance 0.2 % Resistance to Soldering Heat 0.05 % Shock 0.1 % Vibration 0.05 % Life 0.5 % Terminal Strength 0.1 % Dielectric Withstanding Voltage 0.05 % Note (1) Tests per MIL-R-10509 Revision: 15-Nov-12 Document Number: 31014 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RATED POWER IN % HEAT RISE (C ABOVE AMBIENT)