CH0402-25RJFPT

333 3 CH www.vishay.com Vishay Sfernice High Frequency 50 GHz Thin Film Chip Resistor FEATURES Operating frequency 50 GHz Thin film microwave resistors Flip chip, wraparound or one face termination Small size, down to 20 mils by 16 mils Edged trimmed block resistors Pure alumina substrate (99.5 %) Ohmic range: 10R to 500R Design kits available ADDITIONAL RESOURCES -24 Small internal reactance (LC down to 1 x 10 ) Tolerance 1 %, 2 %, 5 % TCR: 100 ppm/C in (-55 C, +155 C) temperature range 3D Models TCR: 50 ppm/C available upon request for 10 to150 Those miniaturized components are designed in such a way ohmic range that their internal reactance is very small. When correctly Material categorization: for definitions of compliance mounted and utilized, they function as almost pure resistors please see www.vishay.com/doc 99912 on a very large range of frequency, up to 50 GHz. STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RATED POWER LIMITING ELEMENT TEMPERATURE TOLERANCE MODEL SIZE RANGE Pn VOLTAGE COEFFICIENT % W V ppm/C CH02016 02016 10 to 500 0.030 30 2, 5 100 (50 upon request) CH0402 0402 10 to 500 0.050 37 1, 2, 5 100 (50 upon request) CH0603 0603 10 to 500 0.125 50 1, 2, 5 100 (50 upon request) DIMENSIONS in millimeters (inches) CH02016 F / CH02016 P / CH0402 N / CH0402 G / CH0402 F / CH0603 F CH0402 P / CH0603 P CH0603 N / CH0603 G DIMENSIONS CASE SIZE D E when A B C F G MODEL / applicable 0.10 ( 0.004) 0.10 ( 0.004) 0.127 ( 0.005) 0.050 ( 0.002) 0.050 ( 0.002) TERMINATION MIN. MAX. CH02016 F 0.110 0.150 (1) 0.480 (0.020) 0.390 (0.016) 0.420 (0.016) 0.260 (0.010) 0.300 (0.012) CH02016 P (0.004) (0.006) CH0402 F 0.150 0.350 CH0402 N 1.000 (0.040) 0.600 (0.023) 0.500 (0.020) n/a n/a (0.006) (0.014) CH0402 G 0.110 0.150 CH0402 P 1.200 (0.047) 0.600 (0.023) 0.500 (0.020) 0.320 (0.013) 0.880 (0.035) (0.004) (0.006) CH0603 F 0.250 0.510 CH0603 N 1.520 (0.060) 0.750 (0.030) 0.500 (0.020) n/a n/a (0.010) (0.020) CH0603 G 0.235 0.275 CH0603 P 1.720 (0.068) 0.750 (0.030) 0.500 (0.020) 0.660 (0.026) 1.355 (0.053) (0.009) (0.011) Note (1) 0.070 ( 0.003) Revision: 21-Jan-2020 Document Number: 53014 1 For technical questions, contact: sferthinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D CH www.vishay.com Vishay Sfernice TOLERANCE VS. OHMIC VALUES Ohmic range 10 R < 50 50 R 500 Tolerance CH02016 5 % 2 %, 5 % Tolerance CH0402 and CH0603 2 %, 5 % 1 %, 2 %, 5 % LAND PATTERN FOR F FLIP CHIP TERMINATIONS in millimeters (inches) G min. X max. Z max. CHIP SIZE Z X G max. max. min. 02016 0.53 (0.021) 0.44 (0.017) 0.15 (0.006) 0402 1.40 (0.055) 0.65 (0.026) 0.40 (0.016) 0603 1.71 (0.067) 0.90 (0.035) 0.76 (0.030) Note Suggested land pattern: According to IPC-7351 LAND PATTERN FOR N AND G WRAPAROUND TERMINATIONS in millimeters (inches) G min. Z max. CHIP SIZE Z G X max. min. max. 0402 1.55 (0.061) 0.15 (0.006) 0.73 (0.029) 0603 2.37 (0.093) 0.35 (0.014) 0.98 (0.039) Dimension and tolerance of land pattern shall be defined by PCB designer PCB can be designed according to IPC-7351 A Generic Requirements for Surface Mount Design and Land Pattern Standard Revision: 21-Jan-2020 Document Number: 53014 2 For technical questions, contact: sferthinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 X max.