IL211AT, IL212AT, IL213AT Vishay Semiconductors Optocoupler, Phototransistor Output, with Base Connection in SOIC-8 FEATURES A 1 8 NC Isolation test voltage, 4000 V RMS 2 K 7 B Industry standard SOIC-8 surface mountable NC 3 6 C package E NC 4 5 Compatible with dual wave, vapor phase and IR i179002-1 reflow soldering V DE i179025 Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC DESCRIPTION AGENCY APPROVALS The IL211AT, IL212AT, IL213AT are optically coupled pairs UL1577, file no. E52744 system code Y with a gallium arsenide infrared LED and silicon NPN phototransistor. Signal information, including a DC level, cUL - file no. E52744, equivalent to CSA bulletin 5A can be transmitted by the device while maintaining a high (1) DIN EN 60747-5-2 (VDE 0884) degree of electrical isolation between input and output. (1) DIN EN 60747-5-5 (pending) The IL211AT, IL212AT, IL213AT comes in a standard Note SOIC-8 small outline package for surface mounting which (1) Available upon request, as option 1 makes it ideally suited for high density applications with limited space. In addition to eliminating through-holes requirements, this package conforms to standards for surface mounted devices. A choice of 20 %, 50 %, and 100 % minimum CTR at I = 10 mA makes these optocouplers suitable for a variety F of different applications. ORDERING INFORMATION SIOC-8 IL 2 1 A T 6.1 mm PART NUMBER CTR (%) AGENCY CERTIFIED/PACKAGE 10 mA UL, cUL > 20 > 50 > 100 SIOC-8 IL211AT IL212AT IL213AT ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Peak reverse voltage V 6V R Forward continuous current I 60 mA F Power dissipation P 90 mW diss Derate linearly from 25 C 1.2 mW/C OUTPUT Collector emitter breakdown voltage BV 30 V CEO Emitter collector breakdown voltage BV 7V ECO Collector base breakdown voltage V 70 V CBO I I 50 mA CMAX DC CMAX DC I t < 1 ms I 100 mA CMAX CMAX Power dissipation P 150 mW diss Derate linearly from 25 C 2mW/C Document Number: 83615 For technical questions, contact: optocoupleranswers vishay.com www.vishay.com Rev. 1.9, 21-Dec-10 1 IL211AT, IL212AT, IL213AT Optocoupler, Phototransistor Output, Vishay Semiconductors with Base Connection in SOIC-8 Package ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT COUPLER Isolation test voltage V 4000 V ISO RMS Total package dissipation LED and detector P 240 mW tot Derate linearly from 25 C 3.2 mW/C Storage temperature T - 55 to + 150 C stg Operating temperature T - 55 to + 100 C amb Soldering time at 260 C 10 s Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. ELECTRICAL CHARACTERISTCS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I = 10 mA V 1.3 1.5 V F F Reverse current V = 6 V I 0.1 100 A R R Capacitance V = 0 V C 13 pF R O OUTPUT Collector emitter breakdown voltage I = 10 A BV 30 V C CEO Emitter collector breakdown voltage I = 10 A BV7V E ECO Collector dark current V = 10 V I 550 nA CE CEO Collector emitter capacitance V = 0 V C 10 pF CE CE COUPLER Saturation voltage, collector emitter I = 10 mA V 0.4 V F CEsat Isolation test voltage 1 s V 4000 V ISO RMS Capacitance (input to output) C 0.5 50 pF IO Resistance (input to output) R 100 G IO Collector emitter breakdown voltage I = 10 A BV 30 V C CEO Note Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT IL211AT CTR 20 50 % Current transfer ratio I = 10 mA, V = 5 V IL212AT CTR 50 80 % F CE IL213AT CTR 100 130 % SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT I = 2 mA, R = 100 , C L Switching time t , t 3s on off V = 10 V CC www.vishay.com For technical questions, contact: optocoupleranswers vishay.com Document Number: 83615 2 Rev. 1.9, 21-Dec-10