IL250, IL251, IL252, ILD252 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, with Base Connection FEATURES A/C 6 B 1 AC or polarity insensitive inputs C/A 2 5 C Built-in reverse polarity input protection Improved CTR symmetry NC 3 4 E Industry standard DIP package Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 1 8 E A 7 C C 2 APPLICATIONS A 3 6 C Ideal for AC signal detection and monitoring C 4 5 E AGENCY APPROVALS UL1577, file no. E52744, double protection i179037-1 cUL tested to CSA 22.2 bulletin 5A DESCRIPTION CSA 93751 The IL250, IL251, IL252, ILD252 are bidirectional input BSI EN 60950, BSI EN 60065 optically coupled isolators consisting of two gallium DIN EN 60747-5-5 (VDE 0884-5) arsenide infrared LEDs coupled to a silicon NPN CQC GB4943.1-2011 and GB8898-2011 (suitable for phototransistor per channel. installation altitude below 2000 m) The IL250 has a minimum CTR of 50 %, the IL251 has a minimum CTR of 20 %, and the IL252, ILD252 has a minimum CTR of 100 %. The IL250, IL251, IL252 are single channel optocouplers. The ILD252 has two isolated channels in a single DIP package. ORDERING INFORMATION DIP Option 6 IL x 2 5 x - X 0 T PART NUMBER CTR PACKAGE OPTION TAPE 10.16 mm 7.62 mm BIN AND Option 7 Option 9 REEL > 0.1 mm > 0.7 mm CTR (%) AGENCY CERTIFIED/PACKAGE SINGLE CHANNEL, 6 PIN DUAL CHANNEL, 8 PIN UL, CSA, BSI, CQC 20 50 100 100 DIP- IL251 IL250 IL252 - (1) SMD- , option 7 - IL250-X007 IL252-X007T - (1) (1) SMD- , option 9 IL251-X009T IL250-X009T IL252-X009T - VDE, UL, CSA, BSI, CQC 20 50 100 100 DIP- - IL250-X001 IL252-X001 - DIP- , option 6 - - IL252-X016 - (1) SMD- , option 7 - - IL252-X017T ILD252-X017 Notes Additional options may be possible, please contact sales office (1) Also available in tubes do not add T to end Rev. 1.9, 21-Feb-18 Document Number: 83618 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000IL250, IL251, IL252, ILD252 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Forward continuous current I 60 mA F Power dissipation P 100 mW diss Derate linearly from 25 C 1.33 mW/C OUTPUT Collector emitter breakdown voltage BV 30 V CEO Emitter base breakdown voltage BV 5V EBO Collector base breakdown voltage BV 70 V CBO Power dissipation single channel P 200 mW diss Power dissipation dual channel P 150 mW diss Derate linearly from 25 C single channel 2.6 mW/C Derate linearly from 25 C dual channel 2 mW/C COUPLER Total dissipation single channel P 250 mW tot Total dissipation dual channel P 400 mW tot Derate linearly from 25 C single channel 3.3 mW/C Derate linearly from 25 C dual channel 5.3 mW/C Storage temperature T -55 to +150 C stg Operating temperature T -55 to +100 C amb Lead soldering time at 260 C 10 s Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I = 10 mA V -1.2 1.5 V F F OUTPUT Collector emitter breakdown voltage I = 1 mA BV 30 50 - V C CEO Emitter base breakdown voltage I = 100 A BV 710 - V E EBO Collector base breakdown voltage I = 10 A BV 70 90 - V C CBO Collector emitter leakage current V = 10 V I - 5 50 nA CE CEO COUPLER Collector emitter saturation voltage I = 16 mA, I = 2 mA V -- 0.4 V F C CEsat Note Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements Rev. 1.9, 21-Feb-18 Document Number: 83618 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000