ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output (Dual, Quad Channel) FEATURES A 1 8 E Dual Channel C 2 7 C Current transfer ratio at I = 10 mA F C 3 6 C Isolation test voltage, 5300 V RMS E A 4 5 Compliant to RoHS Directive 2002/95/EC and 1 16 A E in accordance to WEEE 2002/96/EC C 2 15 C C 3 14 C AGENCY APPROVALS A 4 13 E Quad Channel UL1577, file no. E52744 system code H, double protection A 5 12 E CSA 93751 C 6 11 C C 7 10 C BSI IEC 60950 IEC 60065 A E 8 9 i179015-3 DIN EN 60747-5-2 (VDE 0884) available with option 1 V DE FIMKO i179012-1 DESCRIPTION The ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 are optically coupled isolated pairs employing GaAs infrared LEDs and silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the drive while maintaining a high degree of electrical isolation between input and output. The ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 are especially designed for driving medium-speed logic and can be used to eliminate troublesome ground loop and noise problems. Also these couplers can be used to replace relays and transformers in many digital interface applications such as CTR modulation. The ILD1, ILD2, ILD5 has two isolated channels in a single DIP package and the ILQ1, ILQ2, ILQ5 has four isolated channels per package. ORDERING INFORMATION DIP- Option 6 I L x - X 0 T 10.16 mm 7.62 mm PART NUMBER PACKAGE OPTION TAPE AND Option 7 Option 9 REEL x = D (Dual) or Q (Quad) > 0.1 mm > 0.7 mm DUAL CHANNEL QUAD CHANNEL AGENCY CERTIFIED/PACKAGE CTR (%) UL, CSA, BSI, FIMKO 20 to 300 100 to 500 50 to 400 20 to 300 100 to 500 50 to 400 DIP-8 ILD1ILD2ILD5--- DIP-8, 400 mil, option 6 - ILD2-X006 - - - - (1) (1) SMD-8, option 7 ILD1-X007T ILD2-X007T -- -- (1) (1) (1) SMD-8, option 9 ILD1-X009T ILD2-X009T ILD5-X009T -- - DIP-16 ---ILQ1ILQ2ILQ5 DIP-16, 400 mil, option 6 - - - ILQ1-X006 ILQ2-X006 - (1) SMD-16, option 7 - - - ILQ1-X007 ILQ2-X007T - (1) (1) (1) SMD-16, option 9 - - - ILQ1-X009T ILQ2-X009T ILQ5-X009T Rev. 1.8, 28-Jun-11 Document Number: 83646 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 www.vishay.com Vishay Semiconductors DUAL CHANNEL QUAD CHANNEL AGENCY CERTIFIED/PACKAGE CTR (%) VDE, UL, CSA, BSI, FIMKO 20 to 300 100 to 500 50 to 400 20 to 300 100 to 500 50 to 400 DIP-8 ILD1-X001ILD2-X001ILD5-X001- -- DIP-8, 400 mil, option 6 - ILD2-X016 - - - - SMD-8, option 7 - ILD2-X017 - - - - SMD-8, option 9 ILD1-X019T - - - - - DIP-16 ----ILQ2-X001- DIP-16, 400 mil, option 6 - - - - ILQ2-X016 - (1) SMD-16, option 7 - - - - ILQ2-X017T - Notes Additional options may be possible, please contact sales office. (1) Also available in tubes do not put T on end. ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Reverse voltage V 6V R Forward current I 60 mA F Surge current I 2.5 A FSM Power dissipation P 100 mW diss Derate linearly from 25 C 1.3 mW/C OUTPUT ILD1 V 50 V CEO ILQ1 V 50 V CEO ILD2 V 70 V CEO Collector emitter reverse voltage ILQ2 V 70 V CEO ILD5 V 70 V CEO ILQ5 V 70 V CEO I 50 mA C Collector current t < 1 ms I 400 mA C Power dissipation P 200 mW diss Derate lineary from 25 C 2.6 mW/C COUPLER Isolation test voltage V 5300 V ISO RMS between emitter and detector Creepage distance 7mm Clearance distance 7mm 12 V = 500 V, T = 25 C R 10 IO amb IO Isolation resistance 11 V = 500 V, T = 100 C R 10 IO amb IO Package power dissipation P 250 mW tot Derate linearly from 25 C 3.3 mW/C Storage temperature T - 40 to + 150 C stg Operating temperature T - 40 to + 100 C amb Junction temperature T 100 C j (2) Soldering temperature 2 mm from case bottom T 260 C sld Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for throught hole devices (DIP). Rev. 1.8, 28-Jun-11 Document Number: 83646 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000