L0805M4R75FBT Vishay

L-NS www.vishay.com Vishay Dale Thin Film Low Value (0.03 to 10 ) Thin Film Resistor, Surface Mount Chip FEATURES Homogeneous nickel alloy film No inductance for high-frequency applications Alumina substrates for high power handling Available capability (2 W maximum power rating) Pre-soldered or gold terminations Available Epoxy bondable termination available Sulfur resistant (per ASTM B809-95 humid Available vapor test) Material categorization: For definitions of compliance please see Actual Size Available www.vishay.com/doc 99912 0805 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For With extremely low resistances and high power capabilities, example, parts with lead (Pb) terminations are not RoHS-compliant. Vishays proven and unique ultra-low value resistors can be Please see the information/tables in this datasheet for details. used in your hybrid or surface-mount applications. These TYPICAL PERFORMANCE resistors are available with solderable or weldable ABSOLUTE terminations. TCR 300 CONSTRUCTION TOL. 1.0 Resistor Film Passivation VALUE AND MINIMUM TOLERANCE Solder VALUE () MINIMUM TOLERANCE Coating 0.1 2.0 % Nickel Barrier 0.25 1.0 % 0.5 1.0 % High Purity 1.0 1.0 % Alumina 2.0 1.0 % Adhesion Layer 10.0 1.0 % < 0.1 20 % STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Nickel alloy - Resistance Range 0.03 to 10 - TCR: Absolute 300 ppm/C - 55 C to + 125 C Tolerance: Absolute 1 % to 20 % (value dependent) - Stability: Absolute -- Stability: Ratio -- Voltage Coefficient -- Working Voltage P x R - Operating Temperature Range - 55 C to + 125 C - Storage Temperature Range - 55 C to + 150 C - Noise < - 35 dB (typical) - Shelf Life Stability: Absolute -- COMPONENT RATINGS (1) CASE SIZE POWER RATING (mW) RESISTANCE RANGE ( ) 0505 125 0.05 to 5.0 0508 400 0.03 to 2.0 0603 125 0.10 to 5.0 0612 500 0.05 to 2.5 0705/0805 200 0.10 to 6.0 1005 250 0.15 to 10.0 1020 1000 0.03 to 3.0 1206 330 0.10 to 10.0 1225 2000 0.03 to 2.6 1505 500 0.25 to 10.0 2010 1000 0.17 to 10.0 2512 2000 0.18 to 10.0 Notes Resistor values beyond ranges shall be reviewed by the factory (1) 0705 and 0805 are the same (only use 0805 when ordering) Revision: 11-Jun-13 Document Number: 60027 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 L-NS www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches and millimeters D W T L SIZE LW T D CASE SIZE INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS + 0.010/- 0.005 + 0.25/- 0.13 0.005 0.13 MAX. + 0.010/- 0.005 + 0.25/- 0.13 0505 0.050 1.27 0.050 1.27 0.020 0.51 0.016 0.41 0508 0.047 1.19 0.081 2.06 0.020 0.51 0.015 0.38 0603 0.064 1.65 0.032 0.81 0.020 0.51 0.012 0.30 0612 0.063 1.60 0.126 3.20 0.020 0.51 0.015 0.38 (1) 0705, 0805 0.075 1.91 0.050 1.27 0.020 0.51 0.021 0.53 1005 0.100 2.54 0.050 1.27 0.030 0.76 0.021 0.53 1020 0.100 2.54 0.200 5.08 0.030 0.76 0.015 0.38 1206 0.126 3.20 0.063 1.60 0.030 0.76 0.020 0.51 1225 0.126 3.20 0.252 5.59 0.020 0.51 0.020 0.51 1505 0.150 3.81 0.050 1.27 0.030 0.76 0.021 0.53 2010 0.200 5.08 0.100 2.54 0.030 0.76 0.019 0.48 2512 0.250 6.35 0.125 3.18 0.030 0.76 0.019 0.48 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) MECHANICAL SPECIFICATIONS Resistive Element Nickel alloy Substrate Material Alumina Terminals Pre-soldered or gold Lead (Pb)-free Option 96.5 % Sn, 3.0 % Ag, 0.5 % Cu Tin/Lead Option Sn63 Lead (Pb)-free Finish and Tin/Lead Hot solder dip ENVIRONMENTAL TESTS DERATING CURVE (1) LIMITS TYPICAL ENVIRONMENTAL TEST 100 R % 1 R % (2) STO 0.5 - 0.19 80 LTO 0.1 - 0.03 60 RSH 0.5 - 0.14 40 Moisture 0.5 0.07 20 HTE 1.0 0.02 Load Life (2000 h at + 70 C) 0.5 0.20 0 070 125150 TCR (ppm) 300 + 150 Ambient Temperature C Notes (1) 0.01 additional allowed for measurement error (2) Testing conducted at 2.0 x working voltage on 2512 case size all other 2.5 x Revision: 11-Jun-13 Document Number: 60027 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Precent of Rated Power