PAT0805E2401BST5

PAT Vishay Thin Film Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kV ESD Rating FEATURES Resistance range: 10 to 3 M AEC-Q200 qualified AEC-Q200 ESD rated class 1C (2 kV) Laser trimmed to any value Moisture resistant to MIL-STD-202, method 202 Tantalum nitride resistor film on high purity alumina These chip resistors are available in wraparound substrate terminations styles in 8 case sizes. They incorporate self 100 % visual inspected per MIL-PRF-55342 passivated enhanced tantalum nitride resistor film to give Laser-trimmed tolerances to 0.1 % superior performance on moisture resistance, electrostatic discharge, voltage coefficient, power handling and Load life stability < 0.05 % at 1000 h at 70 C resistance stability. The terminations consist of an adhesion Very low noise and voltage coefficient layer, a leach resistant nickel barrier, and solder coating (< - 30 dB, < 0.1 ppm/V) (lead (Pb)-free). This product will out-perform all Compliant to RoHS directive 2002/95/EC requirements of AEC-Q200. CONSTRUCTION TYPICAL PERFORMANCE T antalum Nitride Resistive Film Passivation ABSOLUTE Solder Coating TCR 25 Nickel Barrier TOL. 0.1 High Purity Alumina Substrate Adhesion Layer STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 10 to 3 M - TCR: Absolute 25 ppm/C to 100 ppm/C - 55 C to + 125 C Tolerance: Absolute 0.1 % to 1.0 % + 25 C Stability: Absolute 0.05 % 2000 h at 70 C rated power Stability: Ratio Not applicable - Voltage Coefficient Less than 0.1 ppm/V - Working Voltage 75 V to 200 V - Operating Temperature Range - 55 C to + 150 C - Storage Temperature Range - 55 C to + 150 C - Noise < - 30 dB - Shelf Life Stability: Absolute 100 ppm 1 year at 25 C COMPONENT RATINGS CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0402 50 75 20 to 35K 0603 150 75 10 to 80K 0805 200 100 10 to 301K 1206 400 200 10 to 1M 1505 400 150 10 to 1M 2208 750 150 10 to 1.75M 2010 800 200 10 to 2M 2512 1000 200 10 to 3M ** Please see document Vishay Material Category Policy: www.vishay.com/doc 99902 Document Number: 60024 For technical questions, contact: thinfilm vishay.com www.vishay.com Revision: 25-Aug-10 81 PAT Precision Automotive Thin Film Chip Resistors, Vishay Thin Film AEC-Q200 Qualified, 2 kV ESD Rating DIMENSIONS in inches DT D W T E L L CASE SIZE L W T D E 0402 0.042 0.008 0.022 0.005 0.015 0.003 0.010 0.005 0.010 0.005 0603 0.064 0.006 0.032 0.005 0.015 0.003 0.012 0.005 0.015 0.005 0805 0.080 0.006 0.050 0.005 0.015 0.003 0.015 0.005 0.015 0.005 1206 0.126 0.008 0.063 0.005 0.015 0.003 0.020 + 0.005, - 0.010 0.020 + 0.005, - 0.010 1505 0.155 0.007 0.050 0.005 0.015 0.003 0.015 0.005 0.015 0.005 2010 0.209 0.009 0.098 0.005 0.015 0.003 0.020 0.005 0.020 0.005 2208 0.230 0.007 0.075 0.005 0.015 0.003 0.020 0.005 0.020 0.005 2512 0.259 0.009 0.124 0.005 0.015 0.003 0.020 0.005 0.020 0.005 ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements) LIMITS TYPICAL VISHAY ENVIRONMENTAL TEST CONDITIONS PER AEC-Q200 PERFORMANCE Resistance Temperature Characteristic - 55 C to + 125 C 50 ppm/C 35 ppm/C Max. Ambient Temp. at Rated Wattage + 70 C + 70 C Max. Ambient Temp. at Power Derating + 150 C + 150 C High Temperature Storage R MIL-STD-202, 108, 1000 h at 125 C 0.1 % + 0.016 % Temperature Cycling R JESD22, JA-104, 1000 cycles, - 55 C to + 125 C 0.15 % + 0.013 % Moisture Resistance R MIL-STD-202, 106 0.20 % + 0.0010 % Biased Humidity R MIL-STD-202, 103, 1000 h at 85 C, 85 % RH, 10 % P 0.10 % + 0.0297 % Life R MIL-STD-202, 108 at 125 C, 1000 h 0.1 % + 0.0220 % Mechanical Shock R MIL-STD-202, method 213, condition C 0.1 % + 0.0130 % Vibration R MIL-STD-202 method 204, 10 Hz to 2 kHz 0.1 % + 0.0030 % Resistance to Soldering Heat R MIL-STD-202, 204, condition B 0.10 % + 0.0150 % Electrostatic Discharge R AEC-Q200-002 at 2 kV, human body 0.10 % - 0.032 % Solderability Visual J-STD-002, method B and B1 95 % Acceptable Terminal Strength R AEC-Q200-006 at 1 kg for 60 s 0.10 % + 0.012 % Flame Retardance Visual AEC-Q200-001 para 4.0 Acceptable GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PAT1206E1002BST1 PA T 1 2 06 E 1 0 0 2 B ST 1 GLOBAL CASE TCR RESISTANCE TOLERANCE TERMINATION PACKAGING MODEL SIZE CHARACTERISTIC PAT 0402 E = 25 ppm/C The first 3 digits are B = 0.1 % S = Wraparound TAPE AND REEL (1) 0603 H = 50 ppm/C significant figures D = 0.5 % lead (Pb)-free T1 = 1000 min., 1000 mult 0805 K = 100 ppm/C and the last digit F = 1.0 % solder TF = Full reel 1206 specifies the number G = 2.0 % w/nickel barrier TS = 100 min., 1 mult 1505 of zeros to follow. J = 5.0 % 2010 R designates the 2208 decimal point. 2512 Example: 10R0 = 10 1000 = 100 1002 = 10 k Note (1) Preferred packaging code www.vishay.com For technical questions, contact: thinfilm vishay.com Document Number: 60024 82 Revision: 25-Aug-10