PTCCL05H181DBE Vishay

2381 66. 5...1/PTCCL..H....BE Vishay BCcomponents 30 V to 60 V PTC Thermistors For Overload Protection FEATURES Wide range of trip and non-trip currents: From 94 mA up to 2 A for the trip current Small ratio between trip and non-trip currents (I /I = 1.5 at 25 C) t nt High maximum overload current (up to 23 A) Leaded parts withstand mechanical stresses and vibration UL file E148885 according to XGPU standard UL1434 UL approved PTCs are guaranteed to withstand severe test programs Long-life cycle tests (over 5000 trip cycles) Long-life storage tests (3000 h at 250 C) Electrical cycle tests at low ambient temperatures (- 40 C or 0 C) Damp-heat and water immersion tests Overvoltage tests at up to 200 % of rated voltage Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC APPLICATIONS Over-temperature/over-load protection: Telecommunications Automotive systems Industrial electronics QUICK REFERENCE DATA Consumer electronics PARAMETER VALUE UNIT Electronic data processing Maximum voltage (DC or AC) 30 to 60 V DESCRIPTION These directly heated thermistors have a positive temperature coefficient and are primarily intended for Holding current 0.094 to 2 A overload protection. They consist of a naked disk with two tinned brass or copper clad steel leads and are coated with Resistance at 25 C (R ) 0.3 to 50 25 a high temperature silicone UL 94 V-0 coating. Leadless disks and leaded disks without coating are available on I 0.8 to 23 A max. request. MOUNTING Switch temperature 140 C The PTC Thermistors are suitable for processing on automatic insertion equipment. Operating temperature range - 40 to + 85 C at max. voltage Typical soldering 235 C duration: 5 s (Pb-bearing) 245 C, duration: 5 s (Lead (Pb)-free) Climatic category 40/125/56 Resistance to soldering heat 260 C, duration: 10 s max. MARKING Only the grey lacquered thermistors with a diameter of 8.5 mm to 20.5 mm are marked with BC, R value (example 25 1R9) on one side and I , V on the other side. nt max. Document Number: 29085 For technical questions, contact: nlr vishay.com www.vishay.com Revision: 29-Jul-09 152381 66. 5...1/PTCCL..H....BE 30 V to 60 V PTC Thermistors Vishay BCcomponents For Overload Protection (1) ELECTRICAL DATA AND ORDERING INFORMATION for 2381 66. 5...1 max. voltage = 30 V to 60 V (AC or DC) (2) I MAX. I MIN. R V I MAX. DISSIP. D CATALOG NUMBERS nt t 25 I MAX. res 20 % MAX. at V and FACTOR MAX. at 25 C at 25 C at 25 C max. BULK TAPE ON REEL (V) (mW/K) (mm) (mA) (mA) () (mA) 25 C (mA) 94 145 50 60 800 22 6.9 5 2381 660 59491 2381 660 69491 130 195 25 60 1200 25 6.9 5 2381 660 51311 2381 660 61311 180 270 13 30 1700 45 6.9 5 2381 660 51811 2381 660 61811 270 405 6 30 2500 60 6.9 5 2381 660 52711 2381 660 62711 320 480 5 30 3500 62 7.8 7 2381 661 53211 2381 661 63211 410 615 3 30 4500 65 7.8 7 2381 661 54111 2381 661 64111 470 705 2.5 30 5000 70 8.8 8.5 2381 661 54711 2322 661 64711 540 810 1.9 30 6000 75 8.8 8.5 2381 661 55411 2381 661 65411 610 915 1.7 30 7000 80 9.9 10.5 2381 662 56111 2381 662 66111 700 1050 1.3 30 8000 90 9.9 10.5 2381 662 57011 2381 662 67011 830 1245 1.1 30 10 000 100 11.5 12.5 2381 662 58311 2381 662 68311 920 1380 0.9 30 11 000 105 11.5 12.5 2381 662 59211 2381 662 69211 1170 1755 0.7 30 13 500 140 14.5 16.5 2381 663 51121 - 1390 2085 0.5 30 16 000 170 14.5 16.5 2381 663 51321 - 1770 2655 0.4 30 20 000 200 18.7 20.5 2381 664 51721 - 2050 3075 0.3 30 23 000 220 18.7 20.5 2381 664 52021 - Notes (1) The thermistors are clamped at the seating plane. (2) I is the maximum overload current that may flow through the PTC when it passes from the low ohmic to the high ohmic state. max. UL approval: I x 0.85 max. SAP AND 12NC PART NUMBERS 12NC SAP CODING 12NC SAP CODING 2381 660 x9491 PTCCL05H940EyE 2381 662 x6111 PTCCL11H611DyE 2381 660 x1311 PTCCL05H131EyE 2381 662 x7011 PTCCL11H701DyE 2381 660 x1811 PTCCL05H181DyE 2381 662 x8311 PTCCL13H831DyE 2381 660 x2711 PTCCL05H271DyE 2381 662 x9211 PTCCL13H921DyE 2381 661 x3211 PTCCL07H321DyE 2381 663 51121 PTCCL17H112DBE 2381 661 x4111 PTCCL07H411DyE 2381 663 51321 PTCCL17H132DBE 2381 661 x4711 PTCCL09H471DyE 2381 664 51721 PTCCL21H172DBE 2381 661 x5411 PTCCL09H541DyE 2381 664 52021 PTCCL21H202DBE Notes For bulk parts replace x by 5 and y by B For taped on reel parts replace it x by 6 and y by T CURRENT DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE 250 % 200 I t 150 I nt I 100 max 50 0 - 50 - 25 0 25 50 75 100 T (C) amb www.vishay.com For technical questions, contact: nlr vishay.com Document Number: 29085 16 Revision: 29-Jul-09