VCUT05B1-DD1-G-08 Vishay

333 3 VCUT05B1-DD1 www.vishay.com Vishay Semiconductors Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP1006-2M FEATURES Ultra compact LLP1006-2M package Low package height < 0.4 mm 1 2 1-line ESD protection Working range 5.5 V 21129 Low leakage current < 0.1 A 20855 Low load capacitance C = 10 pF D ESD immunity acc. IEC 61000-4-2 MARKING (example only) 30 kV contact discharge 30 kV air discharge Soldering can be checked by standard vision inspection, XY no X-ray necessary 21121 Pin plating NiPdAu (e4) no whisker growth Bar = pin 1 marking PATENT(S): www.vishay.com/patents X = date code Y = type code (see table below) Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 ADDITIONAL RESOURCES 3D Models Models ORDERING INFORMATION TAPED UNITS PER REEL DEVICE NAME ORDERING CODE MINIMUM ORDER QUANTITY (8 mm TAPE ON 7 REEL) VCUT05B1-DD1 VCUT05B1-DD1-G-08 8000 8000 PACKAGE DATA PACKAGE TYPE MOLDING COMPOUND MOISTURE DEVICE NAME WEIGHT SOLDERING CONDITIONS NAME CODE FLAMMABILITY RATING SENSITIVITY LEVEL MSL level 1 VCUT05B1-DD1 LLP1006-2M P 0.72 mg UL 94 V-0 Peak temperature max. 260 C (according J-STD-020) ABSOLUTE MAXIMUM RATINGS VCUT05B1-DD1 PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Peak pulse current Acc. IEC 61000-4-5, 8/20 s/single shot I 3A PPM Pin 1 to pin 2 Peak pulse power P 38 W PP acc. IEC 61000-4-5 t = 8/20 s single shot p 30 Contact discharge acc. IEC 61000-4-2 10 pulses V ESD ESD immunity kV Air discharge acc. IEC 61000-4-2 10 pulses V 30 ESD Operating temperature Junction temperature T -55 to +145 C J Storage temperature T -55 to +150 C stg PATENT(S): www.vishay.com/patents This Vishay product is protected by one or more United States and international patents. Rev. 1.9, 20-Sep-2019 Document Number: 81149 1 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D VCUT05B1-DD1 www.vishay.com Vishay Semiconductors CUT THE SPIKES WITH VCUT05B1-DD1 The VCUT05B1-DD1 is a Bidirectional and Symmetrical (BiSy) ESD protection device which clamps positive and negative overvoltage transients to ground. Connected between the signal or data line and the ground the VCUT05B1-DD1 offers a high isolation (low leakage current, low capacitance) within the specified working range. Due to the short leads and small packag e size of the tiny LLP1006-2M package the line inductance is very low, so that fast transients like and ESD strike can be clamped with minimal over- or undershoots. ELECTRICAL CHARACTERISTICS VCUT05B1-DD1 (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of lines which can be protected N - - 1 lines channel Reverse stand-off voltage Max. reverse working voltage V -- 5.5 V RWM Reverse voltage At I = 0.1 A V 5.5 - - V R Reverse current At V = 5.5 V I -- 0.1 A R Reverse breakdown voltage At I = 1 mA V 67.5 8.5 V BR At I = 1 A V - 8.3 10.5 V PP C Reverse clamping voltage At I = I = 3 A V - 10.3 12.5 V PP PPM C At V = 0 V f = 1 MHz C -10 13 pF D Capacitance At V = 2.5 V f = 1 MHz C -8- pF D TYPICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb Fig. 2 - 8/20 s Peak Pulse Current Wave Form acc. IEC 61000-4-5 Axis Title 120 10000 Rise time = 0.7 ns to 1 ns 100 12 f = 1 MHz 80 1000 10 60 8 53 40 100 6 27 20 4 0 10 2 -10 0 10 20 30 40 50 60 70 80 90 100 20557 t (ns) 0 2nd line 01 234 5 6 Fig. 1 - ESD Discharge Current Wave Form 21792 V (V) R acc. IEC 61000-4-2 (330 /150 pF) Fig. 3 - Typical Capacitance C vs. Reverse Voltage V D R Axis Title 10000 100 8 s to 100 % 80 1000 60 20 s to 50 % 40 100 20 0 10 010 20 30 40 20548 t (s) 2nd line Rev. 1.9, 20-Sep-2019 Document Number: 81149 2 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 2nd line 2nd line I (%) I (%) PPM ESD 1st line 1st line 2nd line 2nd line C (pF) D