VOD205T, VOD206T, VOD207T, VOD211T, VOD213T, VOD217T www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package FEATURES A1 8C Two channel coupler C2 7E SOIC-8 surface mountable package A3 6C Standard lead spacing of 0.05 C4 5E Available only on tape and reel option (conforms to EIA standard 481-2) i179018-1 V Isolation test voltage, 4000 V DE RMS i179074 Compatible with dual wave, vapor phase and IR reflow DESCRIPTION soldering The VOD205T, VOD206T, VOD207T, VOD211T, VOD213T, Material categorization: For definitions of compliance VOD217T are optically coupled pairs with a gallium arsenide please see www.vishay.com/doc 99912 infrared LED and a silicon NPN phototransistor. Signal AGENCY APPROVALS information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation UL1577, file no. E52744 system code Y between input and output. cUL - file no. E52744, equivalent to CSA bulletin 5A DIN EN 60747-5-5 (VDE 0884-5) approved, contact customer service if this option is required ORDERING INFORMATION SIOC-8 VO D 2 T PART NUMBER 6.1 mm AGENCY CERTIFIED/PACKAGE CTR (%) (1) (2) UL, cUL 40 to 80 63 to 125 100 to 200 > 20 > 100 > 100 SOIC-8 VOD205T VOD206T VOD207T VOD211T VOD213T VOD217T Notes (1) I = 10 mA F (2) I = 1 mA F ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Peak reverse voltage V 6V R Peak pulsed current 1 s, 300 pps I 1A FM Continuous forward current per channel I 30 mA F Power dissipation P 50 mW diss Derate linearly from 25 C 0.66 mW/C OUTPUT Collector emitter breakdown voltage BV 70 V CEO Emitter collector breakdown voltage BV 7V ECO Continuous output current I 50 mA Cmax. Power dissipation per channel P 125 mW diss Derate linearly from 25 C 1.67 mW/C Rev. 1.2, 23-Nov-12 Document Number: 81956 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VOD205T, VOD206T, VOD207T, VOD211T, VOD213T, VOD217T www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT COUPLER Isolation test voltage t = 1 s V 4000 V ISO RMS Total package dissipation ambient P 300 mW tot (2 LEDs and 2 detectors, 2 channels) Derate linearly from 25 C 4mW/C Storage temperature T -40 to +150 C stg Operating temperature T -40 to +100 C amb (1) Soldering time from 260 C T 10 s sld Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices. 200 total pkg 150 100 50 per channel 0 25 50 75 100 125 iild205t 07 T - Ambient Temperature (C) A Fig. 1 - Power Dissipation vs. Ambient Temperature ELECTRICAL CHARACTERISTCS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I = 10 mA V 1.2 1.55 V F F Reverse current V = 6 V I 0.1 100 A R R Capacitance V = 0 V C 25 pF R O OUTPUT Collector emitter breakdown voltage I = 100 A BV 70 V C CEO Emitter collector breakdown voltage I = 100 A BV7V E ECO Collector emitter leakage current V = 10 V, I = 0 A I 550 nA CE F CEO Collector emitter capacitance V = 0 V C 10 pF CE CE Collector emitter saturation voltage I = 10 mA, I = 2.5 mA V 0.4 V F C CEsat COUPLER Capacitance (input to output) C 0.5 pF IO Note Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Rev. 1.2, 23-Nov-12 Document Number: 81956 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Package Power Dissipation (mW)