VS-160MT...C Series www.vishay.com Vishay Semiconductors Three Phase Bridge, 160 A (Power Modules) FEATURES Blocking voltage up to 1800 V High surge capability High thermal conductivity package, electrically insulated case Excellent power volume ratio 3600 V isolating voltage RMS UL approved file E78996 Designed for industrial level Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 MTC DESCRIPTION PRIMARY CHARACTERISTICS A range of extremely compact, encapsulated three phase bridge rectifiers offering efficient and reliable operation. I 160 A at 118 C O They are intended for use in general purpose and heavy duty V 1600 V to 1800 V RRM applications. Package MTC Circuit configuration Three phase bridge MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS 257 A (1) I O T 85 C C 50 Hz 1540 I A FSM 60 Hz 1610 50 Hz 11 860 2 2 I t A s 60 Hz 10 825 2 2 I t 118 580 A s V Range 1600 to 1800 V RRM T Range -40 to +125 C Stg T Range -40 to +150 C J Note (1) Maximum output current must be limited to 220 A to do not exceed the maximum temperature of terminals ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS V , MAXIMUM REPETITIVE V , MAXIMUM NON-REPETITIVE I MAXIMUM RRM RSM RRM VOLTAGE TYPE NUMBER PEAK REVERSE VOLTAGE PEAK REVERSE VOLTAGE AT T = MAXIMUM J CODE V V mA 160 1600 1700 VS-160MT...C 12 180 1800 1900 Revision: 16-Feb-2022 Document Number: 96004 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000VS-160MT...C Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS 160 A Maximum DC output current I 120 rect. conduction angle O at case temperature 118 C t = 10 ms 1540 No voltage reapplied t = 8.3 ms 1610 Maximum peak, one-cycle forward, I A FSM non-repetitive surge current t = 10 ms 1295 100 % V RRM reapplied t = 8.3 ms 1355 Initial T = T maximum J J t = 10 ms 11 860 No voltage reapplied t = 8.3 ms 10 825 2 2 2 Maximum I t for fusing I t A s t = 10 ms 8385 100 % V RRM reapplied t = 8.3 ms 7620 2 2 2 Maximum I t for fusing I t t = 0.1 ms to 10 ms, no voltage reapplied 118 580 A s Low level value of threshold voltage V (16.7 % x x I < I < x I ), T maximum 0.81 FT(TO)1 F(AV) F(AV) J V High level value of threshold voltage V (I > x I ), T maximum 0.98 FT(TO)2 F(AV) J Low level value of forward slope resistance r 16.7 % x x I < I < x I , T maximum 3.89 f1 F(AV) F(AV) J m High level of forward slope resistance r (I > x I ), T maximum 3.68 f2 F(AV) J Maximum forward voltage drop V I = 300 A, T = 25 C, per junction 1.85 FM pk J V RMS isolation voltage V T = 25 C, all terminal shorted f = 50 Hz, t = 1 s 3600 ISOL J THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum junction operating T -40 to +150 J C Maximum storage temperature T -40 to +125 Stg DC operation per module 0.058 Maximum thermal resistance, R thJC junction to case DC operation per junction 0.35 C/W Typical thermal resistance, Per module R 0.03 thCS case to heatsink Mounting surface smooth, flat, and greased to heatsink 5 A mounting compound is recommended and the Mounting torque Nm torque should be rechecked after a period of 3 h to 15 % to terminal 5 allow for the spread of the compound. Lubricated Approximate weight threads. 235 g R CONDUCTION PER JUNCTION SINE HALF WAVE CONDUCTION RECTANGULAR WAVE CONDUCTION DEVICES UNITS 180 120 90 60 30 180 120 90 60 30 VS-160MT...C Series 0.054 0.061 0.076 0.107 0.165 0.039 0.064 0.083 0.111 0.167 C/W Note Table shows the increment of thermal resistance R when devices operate at different conduction angles than DC thJC Revision: 16-Feb-2022 Document Number: 96004 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000