Y11896K65000FR0L

Military and Space Established Reliability Vishay Foil Resistors Bulk Metal Foil Technology RNC90Y and RNC90Z (Z-Foil) to MIL-PRF-55182/9 FEATURES QPL product with established reliability (ER): meets requirements of MIL-PRF-55182/9 Load life stability: 0.005 % for 2000 h, 0.3 W at + 125 C Temperature coefficient of resistance (TCR): 2 ppm/C max. (- 55 C to + 175 C) Resistance tolerance: to 0.005 % Thermal EMF: < 0.1 V/C Qualified resistance range: 4.99 to 121 k (RNC90Y) INTRODUCTION 30.1 to 121 k(RNC90Z) Military Established Reliability resistors from Vishay Foil Specially conditioned non-QPL resistors available Resistors are available in resistance values from 4.99 See data sheet Improved Performance Tested through 121 k and for tolerances from 0.005 % to 1.0 Fast thermal stabilization %. The same resistors are also available as a non-qualified Rise time: 1 ns without ringing product for customers desiring higher or lower resistance Special coatings that provide a cushioning layer which isolates values and the same or better performance capabilities. (See the resistive element from external stresses and moisture table 2) Both the qualified and the non-qualified version are Electrostatic discharge (ESD) above 25 000 V manufactured on the same production line facilities and are Non inductive, non capacitive design subjected to the same process, lot control, conditioning, and Current noise < - 42 dB GRP A (100 %) screening. Qualified versions receive Prototype sample available from 72 h additional MIL Group B and C testing. TABLE 1 - SPECIFICATIONS COMPARISON RNC90Y (QUALIFIED) RNC90Z (QUALIFIED) S555 (NON-QUALIFIED) Z555 (NON-QUALIFIED) SPECIFICATION MIL-PRF-55182/9 MIL-PRF-55182/9 VFR PERFORMANCE VFR PERFORMANCE CHARACTERISTIC Y LIMITS CHARACTERISTIC Z LIMITS LIMITS LIMITS 5 ppm/C 2 ppm/C 5 ppm/C 3 ppm/C 2.5 ppm/C 2 ppm/C Temperature (- 55 C to + 125 C) (- 55 C to + 175 C) (- 55 C to + 125 C) Coefficient of 10 ppm/C Resistance (- 55 C to + 125 C) (+ 125 C to + 175 C) 4.99 to > 25 to Resistance Range 4.99 to 121 k 30.1 to 121 k 1 to 150 k > 80 25 80 Failure Rate Level R Level R Not specified Not specified Load-Life Stability 0.3 W at + 125 C 2) 2) at 2000 h 0.05 % maximum R 0.05 % maximum R 0.015 % maximum R 0.015 % maximum R 2) 2) at 10 000 h 0.5 % maximum R 0.5 % maximum R 0.05 % maximum R 0.05 % maximum R Current Noise Not specified Not specified - 40 dB minimum - 40 dB minimum High-Frequency Operation Rise Time Not specified Not specified 1.0 ns at 1 k 1.0 ns at 1 k 3) Inductance (L) Not specified Not specified 0.1 H maximum 0.1 H maximum 0.08 H typical 0.08 H typical Capacitance (C) Not specified Not specified 1.0 pF maximum 1.0 pF maximum 0.5 pF typical 0.5 pF typical Voltage 0.0005 %/V 0.0005 %/V 0.0001 %/V 0.0001 %/V Coefficient 4) Working Voltage 300 V maximum 300 V maximum 300 V maximum 300 V maximum 5) Thermal EMF Not specified Not specified 0.1 V/C maximum 0.1 V/C maximum 1 V/W maximum 1 V/W maximum Notes 1. Qualification and failure rate verification test data is maintained by Vishay Foil and is available upon request. Lot traceability and identification data is maintained by Vishay Foil for 7 years. 2. Load life R Maximum can be reduced by 80 % through Enhanced Reliability Testing (ERT). Consult our Applications Engineering for details. 3. Inductance (L) due mainly to the leads. 4. Not to exceed power rating of resistor. 5. V/C relates to EMF due to lead temperature differences and V/W due to power applied to the resistor. 6. 0.200 (5.08 mm) lead spacing available - specify RNC90T for RNC90Y, and RNC90S for RNC90Z. Document Number: 63007 For any questions, contact: foil vishaypg.com www.foilresistors.com Revision: 30-Jul-12 1Military and Space Established Reliability Vishay Foil Resistors FIGURE 1 - COMPARISON OF RNC90Y TO RNC90Z TEMPERATURE COEFFICIENT OF RESISTANCE RNC90Y RNC90Z + 1000 + 1000 + 1000 + 1000 + 500 + 400 + 300 + 200 + 160 0 0 - 160 - 200 - 300 - 400 - 500 - 1000 - 1000 - 1000 - 1000 - 55 25 125 175 - 55 25 125 175 Temperature (C) Temperature (C) Specification 5 ppm/C 10 ppm/C Specification 2 ppm/C FIGURE 2 -TRIMMING TO VALUES FIGURE 3 - POWER DERATING CURVE (Conceptual Illustration) + 70 C 200 Current Path Interloop Capacitance Before Trimming Reduction in Series 150 Rated Power Current Path 100 After Trimming Mutual Inductance Trimming Process Reduction due Removes this Material 50 to Change in from Shorting Strip Area Current Direction Changing Current Path and Increasing 0 Resistance - 50 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 Ambient Temperature C Note: Foil shown in black, etched spaces in white FIGURE 4 - IMPRINTING AND DIMENSIONS RNC90Y and RNC90Z Military Approved Resistors Front View Side View Rear View L W Model Number Manufacturers Identification Resistance VFR XXXXX Resistance Number Value Code S8016 Tolerance 100R01 H Code Failure Rate Code XXXXX J B R (Not Present If ST Non-Qualified) Mfr. Code Lead Material B 07 11 LL 22 AWG SW Jan Designator Factory Year Week (0.025 Dia.) 1) (Non Present If LS Solder Coated Non-Qualified) Copper Note 1. 0.200 (5.08 mm) lead spacing available - specify RNC90T for RNC90Y, and RNC90S for RNC90Z www.foilresistors.com For any questions, contact: foil vishaypg.com Document Number: 63007 2 Revision: 30-Jul-12 R/R (ppm) R/R (ppm) Percent of Rated Power