WW05A3SRP4-N2 Wah Wang

WAH WANG HOLDINGS (HONG KONG) CO., LTD. Factory : WAH WANG OPTOELECTRONIC (SHENZHEN) CO LTD Wah Wang Data Sheet for 5mm Super Bright Red LED 5A3 Series Angle: 25 Class: P Part No: WW05A3SRP4-N2 th Address : Unit 01, 19 Floor, Nanyang Plaza, No.57 Hung To Road, Kwun Tong, Kowloon, Hong Kong Tel : 852-2512 9939 (10 line) Fax :852-2344 2398 Web Site : www.wahwang.com S.D.N. or D.N. No. : Customer Name : Sample Approval Signature : Date : WW05A3SRP4-N2 Version 2.2 Page 1 of 4 WAH WANG HOLDINGS (HONG KONG) CO., LTD. Factory : WAH WANG OPTOELECTRONIC (SHENZHEN) CO LTD Wah Wang Data Sheet For 5mm Super Bright Red LED 5A3 Series Angle 25 Class: P Features Standard T-1 Diameter Type Package. General Purpose Leads Reliable and Rugged Absolute Maximum Ratings at Ta=25 Parameter MAX. Unit Package Dimensions Power Dissipation 100 mW Peak Forward Current 5.0 5.8 100 mA (1/10 Duty Cycle, 0.1ms Pulse Wide) Continuous Forward Current 20 mA 8.65 11.45 Reverse Voltage 5 V 1.0(.04) 0.6 (.024) 0.5(.02) -40C to +80C Operating Temperature Range + - 25.6(1.0) Storage Temperature Range -40C to +80C 0.5(.02) Lead Soldering Temperature 1.5(.5) 260C for 3 Seconds 2.54(.10) NOM. 3mm(From solder joint to epoxy body) A s the LED chip was in reverse polarity, which is different from normal LED, please check the polarity of the LED before production. And please be noted that BIGGER side of the LED is +ve Electrical Optical Characteristics at Ta=25C Dominant Wavelength Luminous Intensity Forward Voltage / Viewing d/ nm Source Iv / mcd V Angle / Part Number Lens color I = 20mA F I = 20mA (Note 5) I = 20mA Color Deg F F (Note8) (Note 6) Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. WW05A3SRP4-N2 Water Clear Red 620 --- 630 6300 8200 --- 1.8 --- 2.4 25 Reverse Voltage = 5V Reverse Current 5A Notes: 1. All dimensions are in millimeter. 2. Tolerance of measurement is 0.25mm(.01) unless others otherwise noted. 3. Protruded resin under flanges is 1.0mm(0.4) max. 4. Lead spacing is measured where the leads emerge from the package. 5. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. Tolerance of measurement of luminous intensity is 15% 6. is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 1/2 It use many parameters that correspond to the CIE 1931 2 Tolerance of measurement of angle is 5 degree 7. Caution in ESD: Static Electricity and surge damages the LED. lt is recommended to use a wrist band or anti-electrostatic glove when handling the LED.All devices, equipment and machinery must be properly grounded. 8. The dominant wavelength d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 9. Specifications are subject to change without notice. WW05A3SRP4-N2 Version 2.2 Page 2 of 4