ACT108-600E,126 WeEn Semiconductor

ACT108-600E AC Thyristor power switch 22 September 2016 Product data sheet 1. General description AC Thyristor power switch in a SOT54 plastic package with self-protective capabilities against low and high energy transients 2. Features and benefits Exclusive negative gate triggering Full cycle AC conduction Remote gate separates the gate driver from the effects of the load current Very high noise immunity Safe clamping of low energy over-voltage transients Self-protective turn-on during high energy voltage transients 3. Applications Fan motor circuits Pump motor circuits Lower-power highly inductive, resistive and safety loads 4. Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit V repetitive peak off- - - 600 V DRM state voltage I RMS on-state current full sine wave T 71 C Fig. 1 - - 0.8 A T(RMS) lead Static characteristics I gate trigger current V = 12 V I = 100 mA LD+ G- 1 - 10 mA GT D T T = 25 C Fig. 6 j V = 12 V I = 100 mA LD- G- 1 - 10 mA D T T = 25 C Fig. 6 jWeEn Semiconductors ACT108-600E AC Thyristor power switch 5. Pinning information Table 2. Pinning information Pin Symbol Description Simplified outline Graphic symbol 1 CM common LD 2 G gate G 3 LD load CM 001aaj924 3 2 1 TO-92 (SOT54) 6. Ordering information Table 3. Ordering information Type number Package Name Description Version ACT108-600E TO-92 plastic single-ended leaded (through hole) package 3 leads SOT54 ACT108-600E All information provided in this document is subject to legal disclaimers. WeEn Semiconductors Co., Ltd. 2016. All rights reserved Product data sheet 22 September 2016 2 / 12