Data sheet Weidmller Interface GmbH & Co. KG PRO INSTA 96W 24V 4A Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com The single-phase INSTA-POWER switching power supplies are characterised by a wide power spectrum, compact design and good value for money. They are suitable for temperature ranges from -25C to +70C, have international approvals and a wide voltage input range. This makes them suitable for a wide range of applications. This also includes signal and telecommunications systems as well as automation systems with a low power requirement up to 96 Watt. General ordering data Version Power supply, switch-mode power supply unit Order No. 2580260000 Type PRO INSTA 96W 24V 4A GTIN (EAN) 4050118590999 Qty. 1 pc(s). Creation date December 8, 2020 11:41:48 AM CET Catalogue status 07.12.2020 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG PRO INSTA 96W 24V 4A Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Technical data Dimensions and weights Depth 60 mm Depth (inches) 2.362 inch Height 90 mm Height (inches) 3.543 inch Net weight 352 g Width 90 mm Width (inches) 3.543 inch Temperatures Storage temperature -40 C...85 C Operating temperature -25 C...70 C Environmental Product Compliance REACH SVHC Lead 7439-92-1 Input AC current consumption 1.2 A 230 V AC / 2.5 A AC input voltage range 85...264 V AC (derating at 100 V AC 100 V AC) Connection system DC current consumption 0.4 A 370 V DC / 1.35 PUSH IN A 120 V DC DC input voltage range 95370 V DC Frequency range AC 4565 Hz Input fuse (internal) Yes Inrush current max. 40 A Rated input voltage Recommended back-up fuse 2 A / DI, safety fuse 6 A, Char. B, circuit breaker 100 - 240 V AC / 120 - 2...4 A, Char. C circuit 340 V DC breaker Output Capacitive load unrestricted Connection system PUSH IN Nominal output current for U Output voltage 22...28 V (adjustable via nom 4 A 55 C potentiometer on front) Output voltage, max. 28 V Output voltage, min. 22 V Output voltage, note (adjustable via Ramp-up time potentiometer on front) 100 ms Rated output voltage Residual ripple, breaking spikes < 50 mVss U , Full Nenn 24 V DC 1 % Load General data Degree of efficiency Housing version Plastic, protective 87 % insulation MTBF Mounting position, installation notice Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring active subassemblies with full load, 5 mm with passive neighbouring subassemblies, direct row > 750.000 h nach IEC mounting with 90% rated 61709 (SN29500) load Operating temperature Protection against reverse voltages from -25 C...70 C the load 3035 V DC Creation date December 8, 2020 11:41:48 AM CET Catalogue status 07.12.2020 / We reserve the right to make technical changes. 2