Data sheet Weidmller Interface GmbH & Co. KG RSSD Klingenbergstrae 16 RS SD37S LP3R D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Pin on SubD for the earth connection. General ordering data Type RS SD37S LP3R Order No. 8019960000 Version Interface, RSSD, SUB-D plug, in compliance with IEC 807-2 / DIN 41652, 37-pole plug, Screw connection GTIN (EAN) 4008190109004 Qty. 1 pc(s). Creation date December 10, 2013 10:08:34 PM CET Catalogue status / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG RSSD Klingenbergstrae 16 RS SD37S LP3R D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Length 80 mm Width 87 mm Height 80 mm Net weight 212 g Temperatures Operating temperature 0...+55C Storage temperature -40...+70 C Connection Data Connection on control side SUB-D plug, in compliance Number of poles (control side) with IEC 807-2 / DIN 41652 37-pole plug Connection (field side) LP3R 5.08mm Earthing Yes Protective earth connection Flat-blade contact Rating data Rated voltage 100 V Rated current per connection 1.5 A Insulation coordination (EN50178) According to DIN EN 50178 Rated insulation voltage 100 V Surge voltage category II Pollution severity level 2 Pulse voltage test (1,2/50s) 0.8 kV Connection field Type of connection Screw connection Clamping range, min. 0.13 mm Clamping range, max. 6 mm Solid, min. H05(07) V-U 0.5 mm Solid, max. H05(07) V-U 6 mm Flexible, min. H05(07) V-K 0.5 mm Flexible, max. H05(07) V-K 4 mm Flexible with sleeve, max. 2.5 mm Flexible with sleeve, min. 0.5 mm Sleeve with plastic collar, max. 2.5 mm Min. wire cross-section, AWG field AWG 26 Max. wire cross-section, AWG field AWG 12 Tightening torque, min. 0.5 Nm Tightening torque, max. 0.6 Nm Stripping length 6 mm Classifications ETIM 3.0 EC001419 UNSPSC 30-21-18-01 eClass 5.1 27-24-22-04 eClass 6.2 27-24-22-04 eClass 7.1 27-24-22-04 Product information Descriptive text accessories Refer to theUniversal cables PAC-UNI section in this chapter Approvals Approvals ROHS Conform Creation date December 10, 2013 10:08:34 PM CET Catalogue status / We reserve the right to make technical changes. 2