MKY22W26804J00KSSD

D WIMA MKP-Y2 Metallized Polypropylene (PP) RFI-Capacitors Class Y2 in PCM 10 mm to 37.5 mm. Capacitances from 1000 pF to 1.0 mF. Rated Voltage 300 VAC. Special Features Electrical Data Reliable self-healing Capacitance range: 1000 pF to 1.0 mF Insulation resistance at +20+ C: 4 High degree of interference Rated voltage: 300 VAC C 0.33 mF: U 1.5 x10 M suppression due to good Continuous DC voltage* (general guide): C 0.33 mF: U 5 000 sec (M x mF) attenuation and low ESR 1000 V Measuring voltage: 100 V/1 min. AEC-Q200 qualified Capacitance tolerances: Test specifications: for PCM U 15 mm 20%, 10%, 5% In accordance with IEC 60384-14 According to RoHS 2011/65/EU Operating temperature range: Maximum pulse rise time: 55) C to +105) C 100 V/msec for pulses equal to a voltage Climatic test category: amplitude with 2 x 300 VAC = 425 V Typical Applications 55/105/56 in accordance with IEC according to IEC 60384-14 Passive flammability class: Test voltage: 2700 VDC, 2 sec. Class Y2 RFI applications to meet 3 B for capacitors with V 1750 mm Reliability: EMC regulations 3 C for capacitors with V 1750 mm Operational life 300 000 hours Capacitors connected to the Dissipation factors at + 20) C: tan d Failure rate 2 fit (0.5 x U and 40) C) mains between phase or neutral r and earthed casing at f C 0.1 mF 0.1 mF < C 1.0 mF By-passing of the basic or -4 -4 1 kHz 18 x 10 20 x 10 supplementary insulation, pulse -4 -4 10 kHz 20 x 10 60 x 10 peak voltage 5 kV -4 100 kHz 100 x 10 Approvals: Construction Country Authority Specification Symbol Approval-No. Dielectric: Germany VDE IEC 60384-14/4 40008997 Polypropylene (PP) film Capacitor electrodes: USA/Canada UL UL 60384-14 E 134915 Vacuum-deposited CAN/CSA-E60384-14 Internal construction: Dielectric Vacuum-deposited electrode Mechanical Tests Packing Metal contact layer (schoopage) Pull test on pins: 10 N in direction of pins Available taped and reeled. Terminating wire according to IEC 60068-2-21 PCM 10: triple series connection Vibration: 6 hours at 10 ... 2000 Hz and Detailed taping information and graphs 0.75 mm displacement amplitude or 10 g at the end of the catalogue. in accordance with IEC 60068-2-6 Encapsulation: Low air density: 1kPa = 10 mbar in Solvent-resistant, flame-retardant plastic accordance with IEC 60068-2-13 2 case with epoxy resin seal, UL 94 V-0 Bump test: 4000 bumps at 390 m/sec in Terminations: accordance with IEC 60068-2-29 Tinned wire. Marking: Colour: Red. Marking: Black. For further details and graphs please * If safety-approved EMI suppression refer to Technical Information. capacitors are operated with a DC vol- tage being above the specified AC voltage rating the given approvals are no longer valid (IEC 60384-14). Furthermore the permissible pulse rise time du/dt (F ) will be subject to a reduction max. according to F = F x 2 x UAC / UDC max. r if the DC operating voltage UDC is higher than 2 x UAC 93 06.21D WIMA MKP-Y2WIMA FKP 4 Continuation General Data 300 VAC* Capacitance W H L PCM** Part number 1000 pF 4 9.5 13 10 MKY22W11003D00 1200 4 9.5 13 10 MKY22W11203D00 1500 4 9.5 13 10 MKY22W11503D00 1800 4 9.5 13 10 MKY22W11803D00 2200 4 9.5 13 10 MKY22W12203D00 2700 4 9.5 13 10 MKY22W12703D00 3300 4 9.5 13 10 MKY22W13303D00 3900 4 9.5 13 10 MKY22W13903D00 4700 5 11 13 10 MKY22W14703F00 5600 5 11 13 10 MKY22W15603F00 6800 6 12.5 13 10 MKY22W16803H00 5 11 18 15 MKY22W16804B00 6 12.5 13 10 8200 MKY22W18203H00 5 11 18 15 MKY22W18204B00 0.01 mF 8 12 13 10 MKY22W21003I00 5 11 18 15 MKY22W21004B00 5 11 18 15 0.012 MKY22W21204B00 0.015 5 11 18 15 MKY22W21504B00 0.018 5 11 18 15 MKY22W21804B00 0.022 6 12.5 18 15 MKY22W22204C00 6 12.5 18 15 0.027 MKY22W22704C00 0.033 8 15 18 15 MKY22W23304F00 0.039 8 15 18 15 MKY22W23904F00 0.047 8 15 18 15 MKY22W24704F00 8 15 18 15 0.056 MKY22W25604F00 0.068 9 16 18 15 MKY22W26804J00 6 15 26.5 22.5 MKY22W26805B00 7 16.5 26.5 22.5 0.082 MKY22W28205D00 * f = 50/60 Hz Part number completion: ** PCM = Printed circuit module = pin spacing Tolerance: 20 % = M 10 % = K Dims. in mm. 5 % = J Packing: bulk = S Pin length: 6-2 = SD Taped version see page 161. d = 0.6 l if PCM = 10 d = 0.8 P if PCM = 15 - 22.5 Rights reserved to amend design data without prior notification. Continuation page 95 94 06.21