Dimensions: mm General Properties: Properties Value Unit Tol. Thermal Conductivity 1800 W/(m*K) max. detail B A Acrylic Tape Certification: Graphite Layer RoHS Approval Compliant (EC)1907/2006 100,0 0,3 REACh Approval Conform or declared 2011/65/EU&2015/863 1,0 Halogen Free Conform JEDEC JS709B Halogen Free Conform IEC 61249-2-21 B General Information: detail A Operating Temperature -50 up to +120 C Removal Film One Side Acrylic Tape Storage Conditions (in original < 40 C < 75 % RH packaging) Graphite Layer Moisture Sensitivity Level (MSL) 1 Double Side Acrylic Tape Liner Film Scale - 1:8 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD SeMi 001.001 2021-11-29 DIN ISO 2768-1m DESCRIPTION WE-TGS WE-TGS Thermal Graphite Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Sheet Max-Eyth-Str. 1 4051100100017 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com Rectangle eiSos Valid 1/3 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 0,01 0,002 0,017 0,002 0,01 0,002 1,0 100,0 0,3 0,05 0,037 0,006 0,075Packaging: Cautions and Warnings: The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is The following conditions apply to all goods within the product series of WE-TGS of Wrth lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured. Elektronik eiSos GmbH & Co. KG: Handling: General: It is recommended to compress the material with equal pressure on the whole surface. This electronic component is designed and manufactured for use in general electronic equipment. The temperature rise of the component must be taken into consideration. The operating temperature is comprised of ambient Wrth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any temperature and temperature rise of the component.The operating temperature of the component shall not exceed the maximum temperature specified. equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are Do not reuse this product after removal from the mounting board. especially required and/or if there is the possibility of direct damage or human injury. This product cannot ensure insulation due to the risk of powder falling off conductive materials. Electronic components that will be used in safety-critical or high-reliability applications should be pre-evaluated by the customer. The thermal conductivity depends on the final application. Test the adaptability of the product to your application before use. The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable. specified in the datasheet are not met, the isolation layer may be damaged Do not drop or impact the component, the component may be damaged However, no responsibility is assumed for inaccuracies or incompleteness. Wrth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Wrth Elektronik does not warrant any customer qualified product characteristics beyond Wrth Elektroniks specifications, for its validity and sustainability over time. The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products also apply to customer specific products. Product Specific: Cleaning and Washing: Washing agents used during the production to clean the customer application might damage or change the characteristics of the component, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product. Storage Conditions: A storage of Wrth Elektronik products for longer than 12 months is not recommended. Therefore, all products shall be used within the period of 12 months based on the day of shipment. Do not expose the components to direct sunlight. The storage conditions in the original packaging are defined according to DIN EN 61760-2. The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the+- components. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD SeMi 001.001 2021-11-29 DIN ISO 2768-1m DESCRIPTION WE-TGS WE-TGS Thermal Graphite Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Sheet Max-Eyth-Str. 1 4051100100017 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com Rectangle eiSos Valid 2/3 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.