64403216211000 Wurth

Dimensions: mm 1/4-36UNS-2B 8 HEX 22 Connector 1 Connector 2 Scale - 6:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD OTs 001.000 2020-04-30 DIN ISO 2768-1m DESCRIPTION WR-ADPT Coax Adaptor Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 64403216211000 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com SMA Plug to SMB Plug eiCan Valid 1/6 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. O 9,5Material Properties: Electrical Properties: Insulator Material PTFE Properties Test conditions Value Unit Tol. Insulator Color White Impedance Z DC~4 GHz 50 Center Contact Material Beryllium Copper Frequency Range f DC~4 GHz Center Contact Plating Gold, min. 0.76m over Nickel VSWR DC~4 GHz 1.3 max. Body Material Brass Insertion Loss IL DC~4 GHz 0.2 dB max. Body Plating Gold, min. 0.076m over Nickel Insulation Resistance R 500 V (DC) in 120 sec. 1000 M min. ISO Snap Ring Material Beryllium Copper Contact Resistance Initial 1) R DC 0.2 V / 1 A 6 m max. Snap Ring Plating Natural Contact Resistance After Test 2) R DC 0.2 V / 1 A 8 m max. Shell Material Brass Contact Resistance Initial 3) R DC 0.2 V / 1 A 1 m max. Shell Plating Gold, min. 0.076m over Nickel Contact Resistance After Test 4) R DC 0.2 V / 1 A 1.5 m max. Coupling Nut Material Brass Withstanding Voltage 500 V (AC) in 60 sec. 1000 V (RMS) min. Coupling Nut Plating Gold, min. 0.076m over Nickel 1) Center Contact 2) Center Contact Retention Ring (C Ring) Material Stainless Steel 3) Outer Contact Retention Ring (C Ring) Plating Passivated 4) Outer Contact Gasket Material Silicone Mechanical Properties: Gasket Color Red Properties Value Unit Tol. Center Contact Retention (Axial) 17.8 N min. Kind Properties: Mating Cycle 500 Cycles Interface MIL-STD-348 Force to Engage 1) 62.3 N max. Connector Type 1 SMA Force to Disengage 2) 8.9 - 62.3 N Gender 1 Plug Coupling Nut Retention 3) 267 N min. Connector Type 2 SMB Recommended Mating Torque 4) 57 N*cm Gender 2 Plug 1) Connector Type 2 2) Connector Type 2 General Information: 3) Connector Type 1 4) Connector Type 1 Operating Temperature -65 up to +165 C Certification: RoHS Approval Compliant 2011/65/EU&2015/863 REACh Approval Conform or declared (EC)1907/2006 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD OTs 001.000 2020-04-30 DIN ISO 2768-1m DESCRIPTION WR-ADPT Coax Adaptor Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 64403216211000 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com SMA Plug to SMB Plug eiCan Valid 2/6 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.