Dimensions: mm Recommended Land Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. Inductance L 100 kHz/ 100 mV 2x120 H 40% Z Maximum Impedance 460 typ. max 2,7 2 3 Rated Current 1 MHz/ 1 mA 2500 mA max. 2 1 DC Resistance R 2x0.025 max. DC L Leakage Inductance 860 nH typ. S V Insulation Test Voltage 1000 V (AC) max. T Rated Voltage V 80 V R 1 4 6,22 0,1 3 4 10,32 8,7 0,300 Scale - 2:1 Schematic: General Properties: 0,6 0,100 It is recommended that the temperature of the component does not exceed +125 C under worst case conditions 1 1 2 2 4 3 Scale 2:1 Product Marking: Start of Winding CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD Marking 121 (Inductance Code) SBa 006.003 2015-08-06 DIN ISO 2768-1m DESCRIPTION WE-SL5 SMT Common Mode Line Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Filter Max-Eyth-Str. 1 744272121 74638 Waldenburg Germany BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos Valid 1/6 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 0,3 0,1 7,62 0,1 10 0,300 6,5 max. 8,92 2,7Typical Impedance Characteristics: 10000 1000 100 10 1 0.1 1 10 100 1000 Frequency MHz Z (comm) Z (diff) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD SBa 006.003 2015-08-06 DIN ISO 2768-1m DESCRIPTION WE-SL5 SMT Common Mode Line Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Filter Max-Eyth-Str. 1 744272121 74638 Waldenburg Germany BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos Valid 2/6 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Impedance