Dimensions: mm Recommended Hole Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 kHz 0.2 kHz C 220 nF 10% Rated Voltage U 250 V (DC) R Insulation Resistance 1 min 100 V (DC) R 9000 M min. ISO Dissipation Factor 1 kHz DF 1 % max. P Dissipation Factor 10 kHz DF 1.4 % max. Dissipation Factor 100 kHz DF 2.4 % max. Rate of Voltage Rise dV/dt 38 V/s max. p L Dielectric Strength Pin to 1 min 375 V (DC) Pin Dielectric Strength Pin to 5 sec. 500 V (DC) Case Schematic: General Information: General Purpose wound type boxed MKT-Metallized polyester Storage Conditions 5-35 C, < 75% RH Operating Temperature -40 C up to +85 C Maxium Selfheating (Rated) 10 C Test conditions of Electrical Properties: +20C, 35% RH if not specified differently FIT according to separate documentation Component conform to REACh and RoHS requirements and standards Properties Value Unit Tol. Pitch P 7.5 mm 0.5 CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD Length L 10.5 mm 1.5 EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m Height H 12 mm 1 Max-Eyth-Str. 1 DESCRIPTION TECHNICAL REFERENCE 74638 Waldenburg Width W 6 mm 1 MPSP075224K250DCPP45004 Germany WCAP-FTBE Film Capacitors Tel. +49 (0) 79 42 945 - 0 Pin Diameter F 0.6 mm 0.05 ORDER CODE www.we-online.com Pin length G 4 mm 0.5 890273422002CS eiSos we-online.com Pitch p 7.5 mm 0.5 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE Pin Hole Diameter f 0.9 mm 0.05 002.000 Valid 2017-12-20 eiCap 1/7 Pitch 7.5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. W OF G H OfProduct Marking: Capacitance Change vs. Temperature: 1st Line right Matchcode: FTBE 5.0% 2nd Line right Rated Voltage: 250 V 2nd Line left Capacitance & Tolerance Code: 224 K (Basis pF) Top Cover Marking P < 15 Date Code: YWW Top Cover Marking P 15 Date Code & Capacitance & Tolerance Code 3.0% Mechanical Properties Properties Test Conditions File Lead Diameter mm Force N condition Termination Robustness IEC 600668 - 2 - 21 Pull Test 0.5 to 0.8 10 min. 10 sec. 0.9 to 1.25 20 min. 10 sec. Bend Test 0.5 to 0.8 5 min. 2 cycles 1.0% 0.9 to 1.25 10 min. 2 cycles Environmental Tests: Properties Standard all 3 directions, 2 hours each 15 - 55 - 15 Hz, amplitude 0.75 mm or Vibration IEC 60068 - 2 - 6 -1.0% 10 g Damp Heat IEC 60068 - 2 - 78 40C, 95% RH, 56 days Temperature 5 cycles, upper and lower temperature 30 min. each, 30 sec. transfer IEC 60068 - 2 - 14 Cycles time -3.0% -5.0% -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 105 Temperature C CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION TECHNICAL REFERENCE 74638 Waldenburg MPSP075224K250DCPP45004 Germany WCAP-FTBE Film Capacitors Tel. +49 (0) 79 42 945 - 0 ORDER CODE www.we-online.com 890273422002CS eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 002.000 Valid 2017-12-20 eiCap 2/7 Pitch 7.5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Capacitance Change %