AC-DC Power Supplies GSP500 Series 500 Watts Convection/Forced-cooled Ratings Universal 80 - 264VAC Input IT & Medical Safety Approvals <1W Standby Power -40 C to +70 C Operation Remote On/Off 5V/2A Standby Output 3 Year Warranty Dimensions: The GSP500 has been designed to offer a full 500W of output power in a very small mechanical footprint, whilst still providing peak power to 650W, a 5V standby output with 2Amps of current GSP: 6.00 x 4.00 x 1.65 (152.4 x 101.6 x 41.9 mm) capability and an input standby power draw of <1W when the inhibit is activated. (-EF): 6.71 x 4.00 x 1.65 (170.4 x 101.6 x 41.9 mm) Approved for both IT and medical applications the series has output versions from 12V to 48V and can be supplied as a U channel for system cooling or with optional very quiet integral fans (-EF). These fans are intelligently controlled to provide the most optimised accoustic noise in the system and further more the GSP500 can provide up to 180W without forced cooling, thus allowing fans to be switched off during periods of lower system loading. Models & Ratings Output Current V1 Standby Supply Max Output Power Output (1,3) Fan Supply Model Number (2) Voltage Convection Forced Convection Forced Nom Peak 12.0 VDC 15.00 A 42.0 A 5 V/1 A 5 V/2 A 12 V/0.3 A 500 W 650 W GSP500PS12-EF 24.0 VDC 7.50 A 21.0 A 5 V/1 A 5 V/2 A 12 V/0.3 A 500 W 650 W GSP500PS24-EF 48.0 VDC 3.75 A 10.5 A 5 V/1 A 5 V/2 A 12 V/0.3 A 500 W 650 W GSP500PS48-EF Notes 1. Remove suffix -EF (EndFan) for use with integral system cooling. 2. Peak power available for 100 ms maximum with a 10% duty cycle. The average power in a period should be equal or less than the normal power. 3. For optional current share version, add suffix P, e.g. GSP500PS24P or GSP500PS24P-EF. Mechanical Details 5 6.71 (170.40) LOGIC CONNECTOR 0.08 (2.00) 0.63 (15.90) 1 3 9 10 2 1 FAN CONNECTOR M4 SCREW-2X LED 1.14 (28.90) TORQUE: 10.62lbs-in(1.2Nm) Max. 4.00 (101.60) VOUT (-) 0.77 (19.45) VOUT (+) 1.93 (48.94) M3.5 SCREW 9.5mm CENTER TORQUE: 10.62lbs-in(1.2Nm) Max. N L 0.82 (20.95) 7.00 (177.79) 5.65 (143.40) 0.02 (0.50) DETAIL A A 1.65 (41.90) Mounting Hole AIRFLOW A 8 PLCS M3 X 0.5 DIRECTION 0.15 (3.8) MAX Penetration 1.30 (33.00) 0.98 (24.90) Torque: 5 lb/in (0.6 Nm) 0.20 (5.00) 0.21 (5.39) www.xppower.com 1 A AC-DC Power Supplies GSP500 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage - Operating 80 115/230 264 VAC Derate output power <90 VAC. See fig 1. Input Voltage - Fault condition 300 VAC 5 second max Input Frequency 47 50/60 63 Hz > Power Factor 0.9 230 VAC, 100% load Input Current - Full Load 5.0/2.4 A 115/230 VAC Inrush Current 60 A 0.5 All models, when inhibit activated 3.0 GSP500PS12 - 115 VAC 1.3 GSP500PS12 - 230 VAC No Load Input Power 3.0 W GSP500PS24 - 115 VAC 1.2 GSP500PS24 - 230 VAC 4.8 GSP500PS48 - 115 VAC 2.3 GSP500PS48 - 230 VAC Earth Leakage Current 80/220 250 A 115/230 VAC/50 Hz Typ., 264 VAC/60 Hz Max. Input Protection F16 A/250 V internal fuse in both lines Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage - V1 12 48 VDC See Models and Ratings table Initial Set Accuracy 1 % 50% load, 115/230 VAC Output Voltage Adjustment +1,-3 % Minimum Load0A Start Up Delay 0.5 2s 115/230 VAC full load from input AC turn on Hold Up Time 20 ms Drift 0.2 % After 20 min warm up Line Regulation 0.01 0.5 % 90-264 VAC Load Regulation 0.2 1.0 % 0-100% load Recovery within 1% in less than 500 s Transient Response 4% for a 50-75% and 75-50% load step Over/Undershoot 0% Ripple & Noise 0.5 1.5 % pk-pk 20 MHz bandwidth Overvoltage Protection 115 140 % Vnom DC. Output 1, recycle input to reset Overload Protection 110 150 % I nom See fig. 2. Trip and Restart Short Circuit Protection Shutdown & auto recovery Temperature Coefficient 0.05 %/C Overtemperature Protection Shutdown & auto recovery 1 Input Voltage Derating Curve Output Overload Characteristic Figure 1 Figure 2 GSP500PS12 example (others similar). 12 Trip & Restart 550 10 500 8 450 6 400 4 350 2 300 0 0 42 44 46 48 50 52 54 56 58 60 80 85 90 300 264 Input Voltage (VAC) Output Load (A) www.xppower.com 2 Output Power (W) 5 Seconds Maximum Output Voltage (V)