AC-DC Power Supplies XPPower VCE10 Series 10 Watts Compact PCB mount package Encapsulated & open frame versions ITE & household appliance approvals Class II operation Input range 85 to 305VAC Single outputs from 3.3 to 48VDC No load input power <0.3W Low cost GREEN POWER -25C to +70C operating temperature Dimensions: 3 year warranty VCE10: 2.00 x 1.15 x 0.91 (50.8 x 29.2 x 23.1 mm) VCE10-P: The VCE10 is a series of open frame and encapsulated AC-DC single output power supplies 1.90 x 1.05 x 0.88 (48.3 x 26.7 x 22.4 mm) designed for low cost ITE, industrial and domestic applications. The series provides two mechanical options including open frame and encapsulated PCB mount. With approvals to world-wide safety standards including ITE and Household, compliance with class B for conducted and radiated emissions, these class II isolation parts benefit system designers with easy integration into a wide range of applications. Models & Ratings (1) Output Power Output Voltage Output Current Model Number 8 W 3.3 VDC 2400 mA VCE10US03 10 W 5.0 VDC 2000 mA VCE10US05 10 W 9.0 VDC 1110 mA VCE10US09 10 W 12.0 VDC 830 mA VCE10US12 10 W 15.0 VDC 670 mA VCE10US15 10 W 24.0 VDC 420 mA VCE10US24 10 W 48.0 VDC 210 mA VCE10US48 Notes 1. For Open Frame version add suffix -P to model number, e.g. VCE10US12-P. Summary Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage Range 85 305 VAC Derate from 100% at 90 VAC to 90% at 85 VAC No Load Input Power 0.3 W Efficiency 80 % Model dependent Operating Temperature -25 +70 C Derate linearly from 100% at +50 C to 50% at +70 C EMC EN55032 Level B Conducted & Radiated, EN61000-3-2, EN61000-3-3, EN55024 Safety Approvals IEC62368-1, IEC60335-1, IEC60950-1, EN62368-1, EN60335-1, UL62368-1 Input Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage Range 85 305 VAC Derate from 100% at 90 VAC to 90% at 85 VAC Input Frequency 47 63 Hz Input Current - Full Load 0.20/0.12 A rms At 115/230 VAC No Load Input Power 0.3 W Inrush Current 40 A At 230 VAC, cold start 25 C Earth Leakage Current Class II construction no earth Input Protection Internal T1.0 A/300 VAC fuse fitted in line www.xppower.com 1Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 3.3 48 VDC Initial Set Accuracy 3/2 % 3% for 3.3 & 5 V models, 2% for others at 50% load Minimum Load 0 A No minimum load required For 3.3 & 5 V models/Other models: from 10% to 100% load. Total Regulation 5/3 % Includes inital set accuracy, line and load regulation. Total regulation is 7% max. from 0% to 100% load. Start Up Delay 2 s Start Up Rise Time 35 ms Hold Up Time 16 20 ms at full load and 115 VAC Deviation, recovery within 1% in less than 500 s Transient Response 4 % for a 25% load change 120 mV pk-pk 3.3 & 5 V models, 20 MHz bandwidth Ripple & Noise 1 % pk-pk 9 to 48 V models, 20 MHz bandwidth Overvoltage Protection 115 140 % Vnom 210% typical for 03 model, auto recovery Overload Protection 110 180 % Short Circuit Protection Trip & Restart (hiccup mode) Temperature Coefficient 0.05 %/C AC-DC Power Supplies XPPower VCE10 Series Output General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 80 % Model Dependent Isolation: Input to Output 3000 VAC Switching Frequency 5 50 kHz Varied with load 3 Power Density 5.7 W/in For -P version Mean Time Between Failure 550 600 kHrs MIL-HDBK-217F, +25 C GB 0.051 (23) lb (g) Open frame versions (-P) Weight 0.115 (52) lb (g Encapsulated version Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -25 +70 C Derate linearly from 100% at +50 C to 50% at +70 C Storage Temperature -40 +85 C Cooling Convection-cooled Humidity 95 %RH Non-condensing Operating Altitude 5000 m Shock IEC68-2-27, 30 g, 11 ms half sine, 3 times in each of 6 axes Vibration IEC68-2-6, 2 g, 10 Hz to 500 kHz, 10 mins/cycle, 60 mins each cycle Efficiency Graphs VCE10US12-P VCE10US24-P 100% 100% 80% 80% 115Vac 60% 60% 230Vac 40% 40% 20% 20% 10 20 30 40 50 60 70 80 90 100 10 20 30 40 50 60 70 80 90 100 Load (%) Load (%) www.xppower.com 2 Efficiency Efficiency