Angle Position Sensors ANG Sensors Thin, programmable, non-contact magnetic position sensors capable of continuous rotation, with dual outputs available. Description The ANG Series sensors are non-contact, intrinsically linear position sensors with one or two independent (redundant) outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft. Actuator magnet part number AS500106 is required to assure proper operation (ordered separately). Features Typical Applications Angular position sensor with high tolerance for misalignment Hydraulic valves O Non-contact angular position sensing and full 360 rotation Hydraulic controls Custom programming available for: angle range, slope, PWM Electric drives output contact factory Pneumatic controls No mechanical interface means no parts to wear out or jam Zero-contact encoder alternative Comes with 20 AWG 305 mm (12) discrete wire leads Gear selection / shifting position RoHS Compliant Lifting / ride height position IP68* Throttle / pedal position Maximum air gap of 6 mm (0.24) Steering wheel position Compliant to industrial/automotive EMC/EMI/ESD directives Environmental Specifications Operating Temperature -40 C to 140 C (-40 F to 284 F) Ingress Protection IP68* *Contact ZF for details on testing conditions Electrical Specifications Input Supply Voltage Maximum Overvoltage Reverse Battery Protection 5.0 VDC 10% 16 VDC 12 VDC Output Signal 0.5 4.5 VDC (with 5 VDC input) Input Current Single output 8 mA typ., 10 mA max. Dual output 16 mA typ., 20 mA max. Resolution 12 bit Accuracy, overall Programmed angle sensing range 35 < 65 : 2.5% Full scale Programmed angle sensing range: 65 < 360 : 2.0% Full scale Output Linearity Programmed angle sensing range 35 < 65 : 2.5% Full scale Programmed angle sensing range: 65 < 360 : 1.0% Full scale Mechanical Specifications Measuring Range 0 to 360 , customizable (see graph) Air Gap 1 mm to 6 mm (application dependent) 2.5 mm typ. Eccentricity 2 mm (0.08) www.switches-sensors.zf.com ZF Electronics Systems Pleasant Prairie, LLC (ZF) acquired the rights to the CHERRY branded switches and sensors in 2008. Although ZF divested its interest in the CHERRY name in 2015, the switches and sensors remain unchanged and are now sold under the ZF brand. Page 1 of 2 Last update 2017-11-29 specifications subject to change without notice. Products Part Number Output Interface ANG-11HAW1 Analog single 20 AWG x 305 mm (12 ) discrete wires ANG-21HAW1 Analog dual 20 AWG x 305 mm (12 ) discrete wires Typical Output vs. Angular Rotation (as percentage of input) Dimensions mm (inches) Keying feature - Indicates South Pole www.switches-sensors.zf.com ZF Electronics Systems Pleasant Prairie, LLC (ZF) acquired the rights to the CHERRY branded switches and sensors in 2008. Although ZF divested its interest in the CHERRY name in 2015, the switches and sensors remain unchanged and are now sold under the ZF brand. Page 2 of 2 Last update 2017-11-29 specifications subject to change without notice.