LIN-21HAW1 ZF Cherry

Linear Position Sensors LIN Sensors Kit with magnet Thin, programmable, non-contact magnetic position sensors with dual outputs available Description The LIN Series sensors are non-contact linear position sensors with one or two independent outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to a linear displacement of the actuator magnet. The included actuator magnet is specifically paired to the sensor and is required to assure proper operation. Other magnets may yield less than optimal performance. Features Typical Applications Easy setup and robust monitoring with M4 screws Hydraulic valves Dual independent (redundant) outputs assure high reliability Hydraulic controls Custom programming available for: range, slope, PWM output Electric drives No mechanical interface means no parts to wear out or jam Pneumatic controls Comes with 20 AWG 305 mm (1 2 ) discrete wire leads or harness Zero-contact encoder alternative with connector Gear selection / shifting position RoHS Compliant IP68* Suitable for wide air gap applications Compliant to industrial/automotive EMC/EMI/ESD directives Environmental Specifications Operating Temperature -40 C to 140 C (-40 F to 284 F) Ingress Protection IP68* *Contact ZF for details on testing conditions Electrical Specifications Input Supply Voltage Maximum Overvoltage Reverse Battery Protection 5.0 VDC 10% 16 VDC 12 VDC Output Signal 0.5 4.5 VDC (with nominal input) Input Current Single output 8 mA typ., 10 mA max. Dual output 16 mA typ., 20 mA max. Resolution 12 bit Accuracy, overall 2% Full scale Output Linearity 1%Full scale Mechanical Specifications Measuring Range Up to 45 mm Air Gap** 4.5 mm (0.18 ) Maximum Magnet Misalignment 2 mm (0 .08 ) **Output is calibrated to meet spec within air gap shown any variation will affect performance www.cherryswitches.com Page 1 of 2 Last update 2016-07-12 specifications subject to change without notice. Products Part Number Output Interface LIN-11HAW1 Analog single 20 AWG x 305 mm (12 ) discrete wires LIN-21HAW1 Analog dual 20 AWG x 305 mm (12 ) discrete wires Typical Output vs. Linear Displacement (as percentage of input) Dimensions mm (inches) www.cherryswitches.com Page 2 of 2 Last update 2016-07-12 specifications subject to change without notice.