3M MetPak 2-FB Inverse Header 2 mm 5-Row, Right Angle, Solder Tail MP2 Series Three levels of early mate, late break (EMLB) sequencing or selective loading options Footprint compatible with standard Futurebus+ Solder tail with true-position wafer Ideal for hot swapping applications End-to-end stackable Right angle male for daughter card Mates with MP2-R for backplane applications and MP2-SXXXG for coplanar applications RoHS Compliant. See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: September 17, 2013 TS-1122-C Sheet 1 of 4 Physical Insulation: Material: High Temp LCP Flammability: UL 94V-0 Color: Beige Contact: Material: Copper Alloy Plating: Underplating: 50 1.27 m Nickel Wiping Area: See Ordering Information Solder Tails: See Ordering Information Electrical Signal: 1.5 A All contacts simultaneously Current Rating: 3 Insulation Resistance: 10 M Withstanding Voltage: 1000 V AC Environmental -55C to +125C Temperature Rating: 260C (Profile per J-STD-020C) Process Temperature Rating: Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 MetPak is a trademark of 3M Company. Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE) 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M MetPak 2-FB Inverse Header 2 mm 5-Row, Right Angle, Solder Tail MP2 Series POSITION 1 POSITION 2 17.00 .669 13.00 .512 2.00 TYP079 POSITION X E D C B A MATED WITH MP2-RXXX-5XXX-XXXX ROW 17.80 .701 1.50 .059 2.00 .079 4X 7.00 .276 MATING LENGTH 16.80 .662 3.86 mm .152 inch 4.00 Tolerance Unless Noted .157 8.00 .315 0 0.0 0.00 mm 3 0.3 0.13 Dimensions for Reference 2.00 4X 13.90 .079 2.00 Only TYP547 .079 TAIL LENGTH Notes: 3.75 .148 1. Refer to IEC 61076-4-104 Futurebus+ global standard. 2. For special pin arrangements, contact 3M. Ordering Information MP2 - PXXX - 5XM1 - XXXXX Plating Options P = Right Angle Header Inversed Pin Count (See Table 3) (See Table 1) Rows 5 = 5 Rows Loading Pattern and Tail Termination Style Length (See Table 2) M = Solder Tail TS-1122-C Sheet 2 of 4 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions